SAMSUNG DV90BB9445GBUA - Инструкция по эксплуатации - Страница 52

Troubleshooting

English

52

Engl

ish

Information codes

If the dryer fails to operate, you may see an information code on the screen. Check the table below and try 
the suggestions.

Information code

Meaning

Action

Door is open

Dryer operation with the door open

•  Close the door and start again.
•  If this continues, call for service.
•  Check if Child Lock is on. If Child Lock 

is on, you may get this message when 
you open the door even though the 
dryer is not operating.

Open door & check 
inside (Child Lock on)

Child Lock is on. Open the door and 
check inside the drum.

•  If Child Lock is on, turn off Child Lock 

or the power.

Check filter

Lint filter problem

•  Check the lint filter assembly.
•  If this continues, call for service.

Check inner cover of 
heat exchanger

Internal heat exchanger cover 
problem

•  Check the internal heat exchanger 

cover assembly.

•  If this continues, call for service.

Check drainage / 
Empty the tank 

Draining malfunction
Draining pump malfunction
Frozen draining hose
Water tank full

•  Make sure the draining hose is not 

bent or damaged.

•  If the hose is frozen, wrap the hose 

with a towel soaked in warm water for 
approximately ten minutes to thaw 
the hose.

•  Empty the water tank, turn on the 

dryer, and start again.

•  If this continues, call for service.

tC

Air temperature sensor problem

•  Clean the lint filter or the heat 

exchanger.

•  If this continues, call for service.

tC5

Compressor temperature sensor 
problem

•  Wait two to three minutes.
•  Turn the power back on and start 

again.

tC7

Check the Eva In temperature 
sensor

•  Turn the power back on and start 

again.

•  If this continues, call for service.

3C 

Check the motor for operation.

•  Try restarting the cycle.
•  If this continues, call for service.

B-PJT_DV9400B_SimpleUX_WEB_English.indd   52

2022/7/14   15:08:23