Einhell TE-SV 18 Li (2347180) - Инструкция по эксплуатации - Страница 16

GB

- 16 -

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger! 

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

Original operating instructions

• 

Safety instructions

3. Proper use

The equipment is suitable for dry vacuuming 

when using the appropriate 

fi

 lter. The equipment 

is designed only for home use and only for dome-

stic settings. The equipment is not suitable for the 

vacuuming of combustible, explosive or harmful 

substances.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this. 

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

equipment is used in commercial, trade or indust-

rial businesses or for equivalent purposes.

4. Technical data

Voltage supply to motor  .........................  18 V DC

Tank volume:  ................................................ 0.6 l

Weight (without battery):  ...........................  1.8 kg

 5. Before starting the equipment

5.1  Assembling the equipment (Fig. 3a-3b)

Slot the equipment head (3) and the motor brush 

(10) onto the suction tube (7) until they latch in 

place with a click. The motor brush (10), the cre-

vice/brush nozzle (18) and the crevice nozzle (19) 

can be mounted either directly on the equipment 

head or on the suction tube.

Warning! 

Make sure that nothing is jammed bet-

ween the equipment connections.

5.2  Fitting the 

fi

 lters

Important!

Never use the equipment without 

fi

 lters!

Always make sure that the 

fi

 lters are securely 

seated!

Fitting/removing the 

fi

 lters (Fig. 5a-5b)

Press the release button (16) and remove the 

container while doing so (4). You can then take 

the 

fi

 lter (15) together with the 

fi

 lter cage (14) 

out of the container (Fig. 5b). The 

fi

 lter must be 

taken out of the 

fi

 lter cage for it to be thoroughly 

cleaned.

5.3  Fitting the wall holder (Fig. 4)

Danger! 

Check that there are no electric cables 

or other installations (such as water pipes) near 

the drill holes. Make sure that the wall holder is 

fi

 rmly seated on the wall in a horizontal position. 

Use only suitable fasteners on a wall capable of 

bearing the load.

The supplied wall plugs and screws are suitable 

for the following: Concrete, densely structured 

natural stone, solid bricks, solid limestone bricks, 

solid lightweight concrete bricks, and aerated 

concrete.

5.4  Fitting/removing the brush roller (Fig. 6)

While pressing the release button (11) push it to 

the left and hold it tight. Lift the brush roller (12) 

out of the housing. Assemble in reverse order. 

Make sure that the brush roller latches in place 

correctly.

5.5  Suction nozzles

Crevice nozzle (Fig. 2)

The crevice nozzle (19) is designed for vacu-

uming in corners, edges and other areas that are 

di

ffi

  cult to access.

Crevice/brush nozzle (Fig. 7)

The crevice/brush nozzle (18) can be used as 

either a crevice nozzle or a brush. To use it as 

a brush, press the button (z) on the side of the 

nozzle and push the brush forward until it latches 

in place.

5.6  Charging the battery (Fig. 11a)

1.  Take the battery pack out of the equipment. 

Do this by pressing the side pushlock buttons.

2.  Check that your mains voltage is the same as 

Anl_TE_SV_18_Li_SPK13.indb   16

08.07.2021   08:40:27