Bosch GAS 25 L SFC - Инструкция по эксплуатации - Страница 12

12

 | English 

1 609 92A 0X9 | (28.7.14)

Bosch Power Tools



Do not use the vacuum cleaner as a seat. 

The vacuum 

cleaner could become damaged.



Use the mains cable and the vacuum hose carefully. 

Other persons could be harmed.



Do not clean the vacuum cleaner with a water jet point-
ed directly at it. 

The penetration of water into the vacuum 

cleaner lid increases the risk of an electric shock.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Symbols

The following symbols could have a meaning for the use of 
your vacuum cleaner. Please take note of the symbols and 
their meaning. The correct interpretation of the symbols will 
help you to use the vacuum cleaner in a better and safer man-
ner.

Product Description and Specifica-
tions

While reading the operating instructions, unfold the graphics 
page for the vacuum cleaner and leave it open.

Intended Use

The vacuum cleaner is intended for vacuuming and extraction 
of materials that are not hazardous to one’s health and for 
non-flammable liquids. It is suitable for the increased de-
mands of industrial usage, as required in trades, industry and 
workshops.

According to IEC/EN 60335-2-69, vacuum cleaners of dust 
category L may only be used for vacuuming and extraction of 
hazardous dusts with an exposition limit value > 1 mg/m

3

.

Use the vacuum cleaner only when you fully understand and 
can perform all functions without limitation, or have received 
appropriate instructions.

Product Features

The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.

1

Cable holder

2

Carrying handle

3

Vacuum lid

4

Mode selector switch

5

Socket for power tool

6

Lock

7

Hose connection piece

8

Vacuum hose

9

Container

10

Latch of the vacuum cover

11

Dust bag

12

Folded filter

13

Motor protection filter

14

Level sensors

Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can 
be found in our accessories program.

Symbols and their meaning

Read all safety warn-
ings and all instruc-

tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

Vacuum cleaners of dust category L accord-
ing to IEC/EN 60335-2-69 for 

dry vacuum-

ing

 of materials with an exposition limit val-

ue > 1 mg/m

3

 that are hazardous to one’s 

health.

The vacuum cleaner 
contains materials 

that are hazardous to one’s health. Have 
the emptying and maintenance, incl. the 
disposal of dust-collection containers, 
carried out only by specialists. Appropri-
ate protective equipment is required. Do 
not operate the vacuum cleaner without 
the complete filter system. 

Otherwise 

there is danger to your own health.

CAUTION

WARNING

Fold up the vacuum lid 

3

 and hold it. Grasp 

the folded filter 

12

 by the fins, pull up and 

remove.

Symbols and their meaning

OBJ_BUCH-464-007.book  Page 12  Monday, July 28, 2014  1:29 PM