Bosch GAS 18V-1 - Инструкция по эксплуатации - Страница 12

12

 | English 

1 609 92A 3TD | (21.9.17)

Bosch Power Tools

Product Description and Specifica-
tions

Intended Use

The vacuum cleaner is intended for vacuuming dry materials 
that are not harmful to one’s health.

Use the vacuum cleaner only when you fully understand and 
can perform all functions without limitation, or have received 
appropriate instructions.

Rotational Airflow

The bagless filter system removes the need to use dust bags. 
Dirt is collected on the inside wall of the container. 

Product Features

The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.

1

Coarse dirt filter

2

Release button for dust cup

3

On/Off button

4

Handle

5

Battery pack *

6

Motor housing

7

Dust cup 

8

Emptying flap release button 

9

Emptying flap

10

Extension tube

11

Floor nozzle

12

Battery port

13

Battery unlocking button

14

Crevice nozzle 

15

Flexible extension tube

16

Filter grips

17

Filter

18

Rotational Airflow unit with Filter

19

Filter locking tab

20

Wall bracket *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Technical Data

Assembly

Battery Charging



Use only the battery chargers listed on the accessories 
page. 

Only these battery chargers are matched to the lith-

ium-ion battery pack used in your vacuum cleaner.

Note: 

The battery supplied is partially charged. To ensure full 

capacity of the battery, completely charge the battery in the 
battery charger before using your power tool for the first time.

The battery must be removed from the vacuum cleaner to 
charge it.

The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure 
does not damage the battery.

The lithium-ion battery is protected against deep discharging 
by the “Electronic Cell Protection (ECP)”. When the battery is 
empty, the machine is switched off by means of a protective 
circuit: The inserted tool no longer rotates.



Following the automatic shut-off of the vacuum clean-
er, do not continue to press the On/Off button. 

The bat-

tery can be damaged.

The battery is equipped with a NTC temperature control 
which allows charging only within a temperature range of be-
tween 0 ° C and 45 ° C. A long battery service life is achieved 
in this manner.

A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.

Observe the notes for disposal.

Battery Insertion/Removal (see figures A1 – A2)



Do not use force to insert the battery. 

The battery is de-

signed in such a way that it can only be inserted into the 
vacuum cleaner when it is in the right position.

– Slide the battery pack 

5

 all the way into the battery port 

12

.

– To remove the battery 

5

, press the unlocking button 

13

 on 

the battery and pull it out of the battery bay 

12

.

Cordless dry vacuum cleaner

GAS 18V-1

Article number

3 601 JC6 2..

Container volume (gross)

l

0.7

Vacuum, max.

*

kPa

6

Airflow, max.

*

l/s

10

Weight according to EPTA-
Procedure 01:2014

kg

1.3

Technical Data varies depending on filter used.

*depending on the battery pack being used

** limited performance at temperatures < 0 ° C

Permitted ambient temperature
– during charging
– during operation

**

 and during 

storage

° C

° C

0 ... + 45

– 20 ... + 50

Recommended batteries

GBA 18V..

GBA 18V... W

Recommended chargers

GAL 18...

GAL 18... W

Cordless dry vacuum cleaner

GAS 18V-1

Technical Data varies depending on filter used.

*depending on the battery pack being used

** limited performance at temperatures < 0 ° C

OBJ_BUCH-3129-003.book  Page 12  Thursday, September 21, 2017  5:19 PM