Bort BSS-1525 - Инструкция по эксплуатации - Страница 9

9

Product weight

6 kg

6,3 kg

6,7 kg

Voltage / Current frequency

220 V / 50 Hz

THE COMPLETE SET INCLUDES:

1 .  Hose;
2 .  Floor brush;
3 .  Plastic tube;
4 .  Crevice nozzle;
5 .  HEPA filter;
6 .  Sponge filter;
7 .  Adapter .

Product Life:

The service life of the product is 5 years .

Production date:

Is indicated on the packaging of the goods .

Shelf life:

Shelf life is not limited (subject to storage conditions) .

Storage conditions:

Products are stored in dry, ventilated warehouses at tem-

peratures from 0 ° C to +40 ° C with a relative humidity of 

not more than 80% .

Transportation:

It is strongly prohibited dropping and any mechanical 

impact on the packaging during transportation .
When unloading / loading, it is not allowed to use any 

type of equipment that works on the principle of pack-

ing clamping .

GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions .

Failure to follow the warnings and instructions may re-

sult in electric shock, fire and/or serious injury .
Save all warnings and instructions for future reference .
The term “power tool” in the warnings refers to your 

mainsoperated (corded) power tool or battery-operated 

(cordless) power tool .

WORK AREA SAFETY

•  Keep work area clean and well lit . Cluttered or dark ar-

eas invite accidents .

•  Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 

dust . Power tools create sparks which may ignite the 

dust or fumes .

•  Keep children and bystanders away while operating a 

power tool . Distractions can cause you to lose control .

ELECTRICAL SAFETY

•  Power tool plugs must match the outlet . Never modify 

the plug in any way . Do not use any adapter plugs with 

earthed (grounded) power tools . Unmodified plugs 

and matching outlets will reduce risk of electric shock .

•  Avoid body contact with earthed or grounded surfac-

es, such as pipes, radiators, ranges and refrigerators . 

There is an increased risk of electric shock if your body 

is earthed or grounded .

•  Do not expose power tools to rain or wet conditions . 

Water entering a power tool will increase the risk of 

electric shock .

•  Do not abuse the cord . Never use the cord for carrying, 

pulling or unplugging the power tool . Keep cord away 

from heat, oil, sharp edges and moving parts . Dam-

aged or entangled cords increase the risk of electric 

shock .

•  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use . Use of a cord 

suitable for outdoor use reduces the risk of electric 

shock .

•  If operating a power tool in a damp location is una-

voidable, use a residual current device (RCD) protected 

supply . Use of an RCD reduces the risk of electric shock .

PERSONAL SAFETY

•  Stay alert, watch what you are doing and use com-

mon sense when operating a power tool . Do not use 

a power tool while you are tired or under the influence 

of drugs, alcohol or medication . A moment of inatten-

tion while operating power tools may result in serious 

personal injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source 

and/or battery pack, picking up or carrying the tool . 

Carrying power tools with your finger on the switch or 

energising power tools that have the switch on invites 

accidents .

•  Remove any adjusting key or wrench before turning 

the power tool on . A wrench or a key left attached to a 

rotating part of the power tool may result in personal 

injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool 

in unexpected situations .

•  Dress properly . Do not wear loose clothing or jewel-

lery . Keep your hair, clothing and gloves away from 

moving parts . Loose clothes, jewellery or long hair can 

be caught in moving parts .

•  If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are con-

nected and properly used . Use of dust collection can 

reduce dust-related hazards .

POWER TOOL USE AND CARE

•  Do not force the power tool . Use the correct power 

tool for your application . The correct power tool will