Electrolux EWF 1427 - Инструкция по эксплуатации - Страница 9

ENGLISH

5 Programme option buttons

Depending on the program, different functions can be
combined. These must be selected after choosing the
desired program and before depressing the
START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds and the message Err is
displayed.
Press these buttons to select the following options:

PREWASH

: select this option if you wish your

laundry to be prewashed before the main wash (not
available for wool and handwash cycle, miniprogram
and silk).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the program for delicate fabrics the water
is only drained.

QUICK WASH

: this option can be used for lightly

soiled (not for wool, hand wash, silk and
miniprogramme) in order to obtain a good washing
program in a short time. The washing time will be
reduced according to the type of fabric and the
selected temperature. 

EXTRA RINSE

: this option can be selected with

all programmes, except the wool program and
handwash. The machine will add 2 rinses for cottons
and 1 rinse for synthetics, delicates and silk.
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.

EASY IRON:

selecting this button the laundry is

gently washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the machine
will perform 6 rinses instead of 3 for cotton and 4
rinses instead of 3 for synthetics. This function can
be used for cotton and synthetic fabrics. If this
option is selected for cotton programmes, the spin
speed automaticaly will reduce to 900 rpm.

6 DELAY START button 

The wash programme can be delayed from 30 min -
60 min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.

Selecting the delayed start

• Select the programme and the required options.

• Select the delay start.

• Depress START/PAUSE button 

: the machine

starts its hourly countdown.

The programme will start after the selected delay has
expired.

Altering the delayed start

• Depress START/PAUSE button 

.

• Depress DELAY START button until «

0

’»

is

displayed.

• Depress START/PAUSE button again 

.

7 DISPLAY

The display shows the following information:

Duration of the programme - Delayed start -
Incorrect option selection - Alarm code - End of
programme.

After selecting a programme, the duration is
displayed in hours and minutes ( for example 2.05).

The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.

After the programme has started, the time remaining
is updated every minute

.

The selected delay (23 hours max) set by means of
the relevant button appears on the display for 3
seconds, then the duration of the previously
selected programme is displayed.

The countdown is updated every hour and when
remain the last 2 hours each 30 min.

Delayed start

2.05

Duration of the selected

programme

9

132982830 GB.qxd  02/03/2006  8.36  Pagina  9