Electrolux EWF 1427 - Инструкция по эксплуатации - Страница 16

16

11. How to change a programme

during its cycle

Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button .
It is possible to change any phase before the
programme carries it out.
When the programme has started, you can only
reset it by turning the programme selector dial to 

O

and then you can select the new programme. The
washing water remains in the tub. Start the new
programme by depressing the START/PAUSE
button .

12. Cancelling a programme

Turn the selector dial to 

O

to cancel a programme

which is running. Now you can select a new
programme.

13.How to open the door after the

programme has started

First set the machine to PAUSE by pressing the
START/PAUSE button 

.

If the door does not open (door locked light is on),
this means that the machine is already heating, that
the water level is above the bottom edge of the door
or that the drum is turning.
If you cannot open the door but you need to open it
you have to switch the machine off turning the
selector dial to 

O

. After about 3 minutes the door

can be opened (pay attention to the water level and
temperature!). To restart the programme switch on
the machine and select again the desired
programme and options.

14. At the end of the programme

The washing machine stops automatically.
If the Rinse hold 

option has been selected, the

door is locked, the light of the START/PAUSE button
goes off, 

, 

and the door locked light remain lit,

to indicate that the water must be drained before
opening the door. The display shows a flashing zero.
Turn the programme selector dial to Reset 

O

to

switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells. 

8. Select the desired options

The light corresponding to the depressed button
illuminates.

9. Select the DELAY TIME

To delay starting of the programme, press the
DELAY start button. The figures corresponding to
the selected delay will be displayed for about 3
seconds, after which the duration of the selected
programme will appear on the display.

During this period it is possible to load other
laundry:

•

depress START/PAUSE button 

;

•

load the laundry;

•

close the door and depress START/PAUSE button
again.

10. Start the programme

Press the START/PAUSE button 

. The relevant

light will stop flashing. and only the light relevant to
the phase that is in progress will remain lit.
If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the programme
or the selected delay.

14 00

900

500

700

132982830 GB.qxd  02/03/2006  8.36  Pagina  16