Kraft TCH-UMD8201W - Инструкция по эксплуатации - Страница 43

43

USER GUIDE

AUTOMATIC WASHING MACHINE

Vibration in the washing machine.

Check and make sure that all the transport bolts are removed.

Adjust the position of the washing machine level in different planes.

There is a large amount of foam 
through the compartments for 
washing powder.

Reduce the dose of detergent.

Check the water hardness, as well as the amount and type of detergent 
used. 

Interrupting the washing process 
until the end of the program.

Check the supply voltage, water supply, and water drain.

Check the supply voltage, water 
supply, and water drain.

The washing machine is equipped with an automatic water top-up system.

The suspension is caused by the removal of excess foam.

 ATTENTION! Troubleshooting that is not spelled out in this manual can only 

be carried out by a qualified specialist.

In case of malfunctions that are not specified in this manual, you should immediately 

contact  an  authorized  service  center,  specifying  the  type  of  problem  and  the  model  of 
your  washing  machine.  Only  original  spare  parts  can  be  used  for  repairs.  Unqualified 
repair removes the device from warranty service.

SELF-DIAGNOSIS

The  washing  machine  has  an  internal  diagnostic  system,  which,  in  case  of  minor 

malfunctions associated with improper operation, helps to determine their causes.

Display 
LED 

Description 

Reason 

Solution

E30 

Door lock problem

Door is not closed 
properly.

Restart after the door is 
closed.

E10

Water injecting 
problem while 
washing

Tap is not opened or water 
flows too slowly. Inlet valve 
filter is blocked. Inlet pipe 
is twisted. If water is not 
supplied.

Open the tap or wait till 
the water supply becomes 
normal. Check inlet valve 
filter. Straighten the water 
pipe. Check the other taps 
in the room.

E21 

Drain problem while 
washing

Outlet hose is blocked 
or twisted. Drain pump is 
blocked

Wash and straighten 
outlet hose. Wash drain 
pump filter

E12

The water levelin 
drum exceed a 
certain level for alarm

Water overflow 

Restart the washer

Please call up service line if there are still troubles.

Please try again first, call up service line if there are still troubles

ATTENTION! If the error persists, contact an authorized service center.