Kraft TCH-UMD8201W - Инструкция по эксплуатации - Страница 39

Стиральная машина Kraft TCH-UMD8201W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 76
Загружаем инструкцию
background image

39

USER GUIDE

AUTOMATIC WASHING MACHINE

ADDITIONAL FUNCTIONS

 «Protection from children» 

Function is used to enable a special button lock that protects children from accidentally 
changing the settings. All buttons except «On/Off» will be locked.

To  turn  on  the  child  protection,  hold  the  «Spin»  and  «Delayed  Start»  buttons  for  3 
seconds to lock the control buttons, the corresponding indicator will light up. To cancel 
the function, press and hold the same buttons again for 3 seconds.

 Attention! The lock does not turn off automatically after the end of the washing 

cycle!

 

Pantone Black C

 Disabling the audio signal

To  turn  off  the  sound  signal  after  starting  the  washing  machine,  press  and  hold  the 
«Spin» button for 3 seconds. You can return the sound signal in the same way by holding 
the «Spin» button for 3 seconds.

 Delayed start 

The program allows you to postpone the start of washing and set it at the hours when it 
is most convenient for you. To activate the function:
1.Set the programmer knob to the desired program (see the program table).
2.Select additional functions as desired or change the washing parameters.
3.By pressing the «Delayed Start» button, select the time setting 3h/6h/9h (for the 

TCH-UME7201W and TCH-UME5501W model) or in the range from 0 to 24 hours (for 
the TCH-UMD8201W model).

4.Click on the «Start» button/Pause.» The washing machine will switch to standby 

mode. Washing will start automatically after the programmed delay time has elapsed. 

 Pre-wash 

An  additional  «Soaking»  cycle  before  starting  the  main  washing  program.  Use  this 
function to wash heavily soiled laundry. 

 Additional rinsing 

An  additional  rinsing  cycle  for  washing  out  detergent  residues.  Use  this  function  if  you 
think  that  you  need  to  rinse  the  laundry  again  (for  example,  if  too  much  detergent  has 
been used). The cycle can be repeated several times.

Memory function.

 In case of a power outage, the washing machine remembers at 

what stage of washing the shutdown occurred, and when the power supply is restored, it 
will continue washing from the moment of stopping.

Protection

•   During  the  spin,  the  clothes  may  be  distributed  in  the  drum  in  an  undesirable  way. 

The  machine  is  equipped  with  the  function  of  automatic  redistribution  of  laundry, 
which is produced during the spin, after which the spin program continues.

•   If the clothes are not distributed in the necessary way after performing the automatic 

function  of  redistributing  (shaking)  the  laundry,  then  in  order  to  prevent  increased 

Содержание

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

  1. Светлана

    Kraft Technology TCH Umd8201w
    Как отменить/сменить программу стирки?

    Ответить
Часто задаваемые вопросы
Как посмотреть инструкцию к Kraft TCH-UMD8201W?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"