Tefal ZC600138 - Инструкция по эксплуатации - Страница 117

117

EN

6-

 For better juicing performance, we advise to regularly clean the filter 

and the juice bowl.

7-

 After use, it is advisable to clean the appliance as quickly as possible to 

avoid the accumulation of dried food in the appliance. To make cleaning 
easier, you can first rinse it by pouring a glass of water through the feed 
tube during operation.

Common faults

Handling method

The appliance cannot be turned on

Check if the plug has been plugged in properly.
Check if the juicing jug has been fitted properly.

The appliance will not start, and the 
indicator lamp flashes

Check if the juicing or jam bowl has been fitted 
properly, and check if the safety lid is properly 
aligned.

The appliance stopped suddenly 
during operation, and is beeping

Is the appliance is clogged from excessive 

feeding (too many pieces or pieces too large)?   

Put the appliance into “Reverse” mode and let it 
run for 5 seconds.

Has the appliance entered its safety mode 

after working continuously for more than 

20 minutes? 

Solution: Allow the appliance to rest for 
30 minutes, then try again. 
If you are unable to restart the appliance, get in 
touch with our customer service.

The filter has been scratched

The gap between the filter and the rubber 
scraper is very small; do not run the appliance 
when empty.

Very little juice is extracted

Water content varies between different fruits 
and vegetables.
Fruits and vegetables also produce less juice 
when they lose their freshness.

When juicing hard fruits and vegetables, check that 
the pulp lever control is in the “Open” position

There is a lot of water in the pulp

When juicing soft fruits and vegetables, check 
that the pulp lever control is in the “Closed” 
position.

The rubber scraper does not rotate 
during operation

Check if the gear (L) at the base of the juice bowl 
has not deteriorated, if so contact your customer 
service