Profi Cook PC-AE 1156 - Инструкция по эксплуатации - Страница 37

PC-AE1156_IM 

07.06.18

37

The appliance may only be used in the manner described 

in this operating manual. You may not use it for commercial 

purposes.
Any other use shall be considered as not intended use and 

can lead to material damage or even personal injury.

The manufacturer shall not be liable for damages caused by 

not intended use.

Unpacking the Appliance

1.  Remove the appliance from its packaging.

2. 

Remove all packaging materials like foils, filling materi

-

als, cable holders, and carton packaging.

3.  Check the scope of deliveries for completeness.

4.  If there are missing parts or obvious damage, do not use 

the appliance. Return it to your retailer immediately.

 NOTE:

There may still be dust or production remains on the 

appliance. We recommend that you clean the appliance 

as described under “Cleaning”.

Scope of Delivery

1  Base appliance with motor

1  Transparent cover

1  Tamper

1  Centrifuge sieve

1  Centrifuge housing

1  Pulp container

1  Juice jug with skimmer and lid

Overview of the Components

1  Tamper

2  Filler opening

3  Transparent cover

4  Centrifugal sieve

5  Centrifuge housing

6  Height-adjustable spout

7 Closures

8  Juice jug

9  Base appliance with motor

10  Control panel

11  Pulp container

12  Drive wheel (not detachable)

13 Latch

Setting Up of the Appliance

For assembly, also refer to the illustrations on page 3.
1.  Place the appliance in such away that the control panel 

is facing you.

2.  Attach the centrifuge housing on top of the base hous-

ing. The base housing has a recess. Here the spout of 

the centrifuge housing must be placed.

3. 

   WARNING: Risk of Cuts!

The centrifugal sieve is sharp!

Place the centrifugal sieve on top of the drive wheel. 

Press it down. It clicks in place on the drive wheel.

4. 

Check the centrifugal sieve!

Feel under the sieve edge. It should not loosen under 

slight tension.

5. 

Attach the pulp container on the left side. To do so, hold 

it slightly sideways to press the upper edge into the 

shroud of the centrifuge housing.

6.  Attach the transparent cover. It reaches all the way over 

the pulp container.

7.   

 NOTE:

The front closure and the transparent cover are each 

provided with a safety switch. These prevent acci

-

dental motor start. Check the correct attachment of 

all components, the centrifugal sieve, the transparent 

cover and the closures.

Secure the transparent cover using both of the closures. 

To do this, insert the recesses of the closures into the 

locks on the centrifuge housing. Push down the clo-

sures. They must audibly engage.

8.  Place the juice jug (without skimmer) at the spout.

Electric Connection

•  Before inserting the power plug into the outlet, check 

that the mains voltage to be used matches that of the 

appliance. You can find the required information on the 

nameplate.

•  Connect the appliance only to a correctly installed safety 

socket. The   button is illuminated. The appliance is 

ready for use.

Operation

Preparations

•  Wash the fruit to be processed.

• 

Cut the fruit in pieces to fit through the filler opening.

•  Remove large pips and stems.

Function Buttons
The buttons on the appliance are touch keys. Gently touch 

the buttons with a finger to execute the function. Whenever 

a button is pressed, it will be confirmed by a beep sound.