Philips HR1894 - Инструкция по эксплуатации - Страница 8

Built-in safety lock

The appliance is equipped with a built-in safety lock. The two safety pins on the motor unit ensure 

that you can only switch on the appliance if you have placed the juicing unit and the pulp container 

on the motor unit correctly. 

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to 

electromagnetic fields.

Before first use

Thoroughly clean all par ts before you use the appliance for the first time (see chapter ‘Cleaning’).

Note: Make sure all parts are completely dry before you start using the appliance.

Preparing for use

Assembling the juicing unit

Always unwind the mains cord completely before you switch on the appliance.

 1 

 Attach the pulp outlet to the juicing unit and turn it clockwise until the arrow ( 

Á

) points to 

the ‘locked’ indication.  (Fig. 2)

 2 

 Insert the juicing screw into the juicing unit (Fig. 3).

 3 

 Assemble the two parts of the filter (Fig. 4).

 4 

 Place the two-part filter over the juicing screw (Fig. 5).

Tip:  Use the black two-part filter for clear juice. If you prefer cloudy juice with more fibres in it,  

use the grey two-part filter.

  5 

 Attach the spout to the juicing unit and turn it clockwise until the arrow ( 

Á

) points to the 

‘locked’ indication.  (Fig. 6)

 6 

 Place the berry tray on the feeding tube (Fig. 7).

Placing the juicing unit onto the motor unit

 1 

 Place the assembled juicing unit onto the motor unit, with the pulp outlet fitting into the 

opening on the motor unit (Fig. 8).

 2 

 Align the projections on the juicing unit with the recesses in the motor unit. Slide the juicing 

unit onto the motor unit until it locks into place.  (Fig. 9)

 3 

 Press the juicing unit onto the motor unit (1) and then close the locking clamp (2).  (Fig. 10)

Note: If the locking clamp cannot be closed, check if the juicing unit is positioned properly with the 

projections on the juicing unit into the recesses of the motor unit.

 4 

 Slide the pulp container into the motor unit (Fig. 11).

ENGLISH

8