Philips HR1894 - Инструкция по эксплуатации - Страница 11

Problem

Solution

The appliance does 

not work.

The appliance is equipped with two safety pins. If either the juicing unit 

or the pulp container has not been placed on the motor unit properly, 

the appliance does not work. Check whether these par ts have been 

assembled in the right way (see chapter ‘Preparing for use’), but switch 

off the appliance before you do so.

The motor unit gives 

off an unpleasant smell 

the first few times the 

appliance is used.

This is not unusual. If the appliance continues to give off this smell after  

a few times, check the quantities you are processing and the processing 

time.

The juicing unit cannot 

be placed onto the 

motor unit.

Check if the spout is properly attached to the juicing unit. Make sure that 

the projections on the juicing unit are aligned with the recesses in the 

motor unit (see fig. 9).

The juicing unit is 

blocked.

Press the pre-clean button for a few seconds. If the juicing unit is still 

blocked, then switch off the appliance, remove the juicing unit and 

disassemble all par ts. Remove the fruit that is blocking the juicing unit. 

Then process a smaller quantity.

HR1899/HR1897/

HR1896: The  power-

on light flashes.

The juicing unit is blocked. Press the pre-clean button for a few seconds. 

If the juicing unit is still blocked, then switch off the appliance, remove the 

juicing unit and disassemble all par ts. Remove the fruit that is blocking 

the juicing unit. Then process a smaller quantity.

ENGLISH

11