FIRST FA-5206-2 - Инструкция по эксплуатации - Страница 2

3

ENGLISH

2

ATTENTIONS

1.  This machine is unavailble for the weakness, 

unresponsive or psychopathic perosn(including 

children), unless under the direction or help 

from the person who have the responsibility for 

security. Children should be overseen, so it can 

be testified that they are not playing with it. 

2.  Before using, put this machine on a stable and 

even table board, operate according to the above 

methods.

3.  Before juicing, first confirm juicing net and rotor 

clutched in position, and no hard contact between 

juicing net cutter and transparent cover. Put the 

transparent cover on, fasten tight the handle, 

then turn on the machine.

4.  Before being used, the motor works in running-in 

phase, there may be slight peculiar smell and 

spark, this is normal, after the motor works 

for some period, the above phenomenon will 

disappear.

5.  During juicing, make sure there is not too full 

juice and residue in the middle seat and residue 

cup, if too full, please cut off power supply, clean 

up, then use again.

6.  During using, do not open the cup cover. In 

case power supply is on, do not put hand or any 

ware into the mixing cup or feed port, otherwise, 

harmful accident may occur or this machine may 

be damaged.

7.  In order to prolong service life of this machine, 

over-temperature protective device is mounted 

in the motor. If the motor works for a long time 

or overloaded, when over warning temperature, 

power supply will automatically cut off. After the 

motor stops, pull out plug of power supply, wait 

for the motor to cool  (about for 30 min), use 

again.

8.  During operating, please do not leave, never let 

children operate this machine.

9.  When this machine works in mixing, mincing or 

grinding conditions, no-loaded or over loaded 

work is strictly prohibited.

10. After operation, do not pour the food out until pull 

out the plug of power supply.

11. Cutters are very sharp, in order to avoid danger, 

when cleaning a cutter, please put the cutter 

under water tap for washing, do not wash it with 

hand.

12. This machine must not be used for others beyond 

regulated purposes.

13. In case of damaged power supply cord, in order 

to avoid danger, replacement must be performed 

by the manufacturer or its service department or 

similar professional persons.

MAINTENANCE AND CLEANING

1.  This machine shall be often used, so as to keep 

the motor dry and clean. 

2.  If not using for a long time, please store this 

machine at a dry and well-ventilated place so 

as to prevent the motor from being damped and 

going moldy.

3.  No washing the main machine. When cleaning, 

only wipe with wet cloth. Other components may 

be washed directly with water, such as pushing 

bar, cover, middle seat, residue cup, juice nozzle 

cover.

TECHNICAL DATA: 

220-240V • 50Hz • 800W

Environment friendly disposal

You can help protect the environment! Please 

remember to respect the local regulations: 

hand in the non-working electrical equipments to an 

appropriate waste disposal center.

JUICE EXTRACTOR

Please read all instructions carefully before using

DIAGRAM OF NAME AND POSITION 

OF MAIN COMPONENTS

1.  Pushing bar  

2.  Transparent cover  

3.  Juicing net  

4.  Middle ring  

5.  Handle  

6.  Residue barrel  

7.  Main machine  

8.  Juicer jug

PERFORMANCES

1.  For the juicer with large diameter, entire apple 

or pear can be put in for juicing, no cutting apart 

needed, easy and quick.

2.  Design is fine, simple, and beautiful, with 

combined structure, easy to operate and clean.

3.  High speed electric motor with overheating 

protection is adopted, high efficiency, time saving, 

energy saving, high service life of the motor.

4.  Safety lock unit for switching is specially 

designed, in order to make sure safety and 

reliability in use.

ATTENTION BEFORE USING

1.  This machine is set with safety unit, when the 

handle does not fasten the cover or the cutter 

seat is not fastened, the motor cannot turn, so as 

to ensure safety for the user.

2.  When disassembling or assembling the juicer, 

press the upper of feed port of the cover with 

your hand, then force the handle to slide in or out 

of cover slot.

3.  When disassembling juicing net, first remove the 

cover and residue barrel, then turn the middle 

ring up to 30 degrees by holding juicing nozzle 

with your hand, and take up, the juicing net will 

automatically leave the rotor.

4.  In order to avoid damage, before using, first 

check power supply for compliance with rated 

voltage .

5.  Clean all parts able to disassemble (refer to the 

section of „maintenance and cleaning“).

6.  When assembling, please carefully read 

the diagram of „name and position of main 

components“.

7.  Please carefully read the „attentions“ before 

using.

JUICING

1.  Before using, please confirm the button switch 

of the main machine in stop state, in this way, 

in case assembly is not completed, starting the 

main machine can be avoided, so unnecessary 

damage for persons or property avoided.

2.  Before juicing, first confirm juicing net and rotor 

clutched in position, and no hard contact between 

juicing net cutter and transparent cover. Put the 

transparent cover on, put the handle into the 

cover slot, then turn on the machine.

3.  For using, assemble according to the diagram of 

„name and position of main components“. Turn 

on power supply, press switch to let the machine 

run no-load for 5 sec. Put prepared vegetable 

or fruit into feed port of the juicer, press with the 

pushing bar, evenly, hard and slowly, juice of the 

vegetable or fruit can be found, original, fresh, 

good for health.

4.  

Note: 

when pressing food with the pushing bar, 

force shall be even or indirect, pressing force 

shall not be more than 1 kg, no too sudden force, 

otherwise, juicing effect will be reduced.

OPERATING TIME

This machine is designed with button switches of O 

grading, I grading, II grading (O for stop, I for weak 

grading, II for strong grading). For juicing, select 

strong grading, for operating time, after operating for 

1min, stop for 1min, then use again. 

After the above operation is performed for three 

times, stop for 15 min, do not operate until the motor 

is cooled, in this way, service life of this machine 

will be prolonged, the machine will serve you more 

efficiently.

ENGLISH