Ardesto JEG-1000 - Инструкция по эксплуатации - Страница 16

315mm

1

4

5

m

m

JUICE EXTRACTOR

Maintenance and cleaning

Attentions

4

Attentions

5

Please read all instructions carefully before using

1.This machine shall be often used, so as to keep the motor dry 
   and clean. 
2.If not using for a long time, please store this machine at a dry 
   and well-ventilated place so as to prevent the motor from being 
   damped and going moldy.
3.No washing the main machine. When cleaning, only wipe with 
   wet cloth. Other components may be washed directly with 
   water,such as pushing bar, cover, middle seat, residue cup, juice 
   nozzle cover. 

1.This machine is unavailable for the weakness, unresponsive or  

   psychopathic perosn(including children), unless under the direction 

   or help from the person who have the responsibility for security. 

   Children should be overseen, so it can be testified that they are 

   not playing with it. 

2.Before using, put this machine on a stable and even table 

   board, operate according to the above methods.

3.Before juicing, first confirm juicing net and rotor clutched in position, 

   and no hard contact between juicing net cutter and transparent 

   cover. Put the transparent cover on, fasten tight the handle, then 

   turn on the machine.

4.Before being used, the motor works in running-in phase, there 

   may be slight peculiar smell and spark, this is normal, after the 

   motor works for some period, the above phenomenon will disappear.

5.During juicing, make sure there is not too full juice and residue 

   in the middle seat and residue cup, if too full, please cut off power 

   supply, clean up, then use again.

6.During using, do not open the cup cover. In case power supply 

   is on, do not put hand or any ware into the mixing cup or feed 

   port, otherwise, harmful accident may occur or this machine may 

   be damaged.

7.In order to prolong service life of this machine, over-temperature 

   protective device is mounted in the motor. If the motor works for 

   a long time or overloaded, when over warning temperature, power 

   supply will automatically cut off. After the motor stops, pull out 

   plug of power supply, wait for the motor to cool  (about for 30 

   min), use again.

8.During operating, please do not leave, never let children operate 

   this machine.

9.When this machine works in mixing, mincing or grinding conditions, 

   no-loaded or over loaded work is strictly prohibited.

10.After operation, do not pour the food out until pull out the plug 

    of power supply.

11.Cutters are very sharp, in order to avoid danger, when cleaning 

     a cutter, please put the cutter under water tap for washing, do 

     not wash it with hand.

12.This machine must not be used for others beyond regulated 

     purposes.

13.In case of damaged power supply cord, in order to avoid 

     danger, replacement must be performed by the manufacturer 

     or its service department or similar professional persons.

Operating time

This machine is designed with button switches of O grading, I 
grading, II grading (O for stop, I for weak grading, II for strong 
grading).  For juicing, select strong grading, for operating time, 
after operating for 1min, stop for 1min, then use again. After the 
above operation is performed for three times, stop for 15 min, do 
not operate until the motor is cooled, in this way, service life of 
this machine will be prolonged, the machine will serve you more 
efficiently.

1.Before using, please confirm the button switch of the main machine 
   in stop state, in this way, in case assembly is not completed, 
   starting the main machine can be avoided, so unnecessary 
   damage for persons or property avoided.
2.Before juicing, first confirm juicing net and rotor clutched in position, 

   and no hard contact between juicing net cutter and transparent 
   cover. Put the transparent cover on, put the handle into the cover 
   slot, then turn on the machine.
3.For using, assemble according to the diagram of "name and 
   position of main components". Turn on power supply, press 
   switch to let the machine run no-load for 5 sec. Put prepared 
   vegetable or fruit into feed port of the juicer, press with the 
   pushing bar, evenly, hard and slowly, juice of the vegetable or 
   fruit can be found, original, fresh, good for health.
4. Note: when pressing food with the pushing bar, force shall be 
   even or indirect, pressing force shall not be more than 1 kg, no 
   too sudden force, otherwise, juicing effect will be reduced. 

Juicing

3

 Diagram of name and position of main components

1

1.
   in for juicing, no cutting apart needed, easy and quick.
2.Design is fine, simple, and beautiful, with combined structure, 
   easy to operate and clean.
3.High speed electric motor with overheating protection is adopted, 
   high efficiency, time saving, energy saving, high service life of 
   the motor.
4.Safety lock unit for switching is specially designed, in order to 
   make sure safety and reliability in use.

For the juicer with large diameter, entire apple or pear can be put 

 Performances

Attention before using

1.This machine is set with safety unit, when the handle does not 
   fasten the cover or the cutter seat is not fastened, the motor cannot 
   turn, so as to ensure safety for the user.
2.When disassembling or assembling the juicer, press the upper 
   of feed port of the cover with your hand, then force the handle 
   to slide in or out of cover slot.
3.When disassembling juicing net, first remove the cover and residue 

   barrel, then turn the middle ring up to 30 degrees by holding juicing 
   nozzle with your hand, and take up, the juicing net will automatically 

   leave the rotor.

4.In order to avoid damage, before using, first check power supply 
   for compliance with rated voltage .
5.Clean all parts able to disassemble (refer to the section of 
   "maintenance and cleaning").
6.When assembling, please carefully read the diagram of "name 
   and position of main components".
7.Please carefully read the "attentions" before using.

2

1. Pushing bar  
2.Transparent cover  
3. Juicing net
4. Middle ring
5. Handle    

6. Residue barrel  
7. Rotor  
8. Main machine
9. Juicer jug

9

8

7

5

6

4

3

2

1