Смартфоны Nokia 5630 XpressMusic - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
67
C o n n e c t i v i t y
Remote SIM mode
>
On
— to enable another device, for example, a car kit, to use
the SIM card of your device using Bluetooth technology (SIM access profile)
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.
Send data
1. Open the application where the item you want to send is saved.
2. Scroll to the item you want to send, and select
Options
>
Send
>
Via
Bluetooth
.
3. The device starts to search for devices within range. Paired devices are shown
with . Some devices may show only the unique device addresses. To find out
the unique address of your device, enter the code
*#2820#
in the standby
mode.
If you have searched for devices earlier, a list of devices found previously is
shown. To start a new search, select
More devices
.
4. Select the device with which you want to connect.
5. If the other device requires pairing before data can be transmitted, a tone
sounds and you are asked to enter a passcode. Create your own passcode and
share the passcode with the owner of the other device. You do not have to
memorise the passcode.
Pair and block devices
To open a list of paired devices, in the Bluetooth view, scroll right to
Paired
devices
.
To pair with a device, select
Options
>
New paired device
, select the device with
which to pair, and exchange passcodes.
To cancel pairing, scroll to the device whose pairing you want to cancel, and press
the clear key. If you want to cancel all pairings, select
Options
>
Delete all
.
To set a device to be authorised, scroll to the device, and select
Options
>
Set as
authorised
. Connections between your device and an authorised device can be
made without your knowledge. Use this status only for your own devices to which
others do not have access, for example, your PC or devices that belong to someone
you trust. is added next to authorised devices in the paired devices view.
