Смартфоны LG G7050 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
94
Settings
95
Settings
Security settings
Menu 9.5
Various passwords are used to protect certain features of your
phone. Refer to page 23-24 for the various passwords.
PIN code request
(Menu 9.5.1)
When the
PIN code request
feature is enabled, you must enter
your PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone without
your approval.
The following options are available:
•
Enable:
You must enter the PIN each time the phone is switched
on.
•
Disable:
The phone connects directly to the network when you
switch it on.
Phone lock
(Menu 9.5.2)
When the
Phone lock
feature is enabled, the phone is locked
and you must enter the phone password each time the phone is
switched on.
The password is factory set to
0000
. To change the phone
password, refer to the
Change codes
–
Security code
menu
option [Menu 9.5.6.1]. Once the correct password has been
entered, you can use the phone until you switch it off.
The following options are available:
1
Power On
]
Enable:
You are required to enter the phone password when
you switch the phone on.
]
Disable:
You do not need to enter the phone password when
you switch the phone on.
]
If SIM changed:
Your phone will request security code only
when you change your SIM card.
2
Once
]
After entering the correct security code, the phone will lock after
going into the idle state. If you want to disable this phone lock,
you should enter the right security code after pressing the right
soft key. If you power off in the phone lock state, when the
phone is next powered on, the phone is in the lock state.
Key lock
(Menu 9.5.3)
This function is only available in the status of the sliding keypad up.
1
Automatic
]
After setting up the automatic mode, then phone is in lock state
after 25 seconds in standby mode with the sliding keypad up.
]
To deactivate key lock, you should press the left soft key
[Unlock] plus star(*) key or slide the keypad down.
2
Once
]
Selecting
Once
puts the phone immediately in the lock state in
standby mode with the sliding keypad up.
]
To deactivate key lock, you should press the left soft key
[Unlock] plus star(*) key or slide the keypad down.
Note
Before disabling the PIN code request feature, you must enter
your PIN.
