LG F2410 - Инструкция по эксплуатации - Страница 119

Access codes

You can use the access codes described in this 
section to avoid unauthorised use of your phone. The
access codes (except PUK and PUK2 codes) can be
changed by using the 

Change codes

feature 

[Menu 7-5-5]. See page 72.

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code 
protects your SIM card against unauthorised use. The
PIN code is usually supplied with the SIM card. When
the 

PIN code request

is set to 

Enable

, your phone will

request the PIN code every time the phone is
switched on. When the 

PIN code request

is set to

Disable

, your phone connects to the network directly

without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is
required to access functions such as 

Advice of Call

Charge

and 

Fixed dial number

. These functions are

only available if supported by your SIM card. Check
with your network for further information.

PUK code (4 to 8 digits)

The PUK (PIN Unblocking Key) code is required to
change a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your 
network operator for the code. If you lose the code,
also contact your network operator.

PUK2 code (4 to 8 digits)

The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code. If you lose
the code, also contact your network operator.

Security code (4 to 8 digits)

The security code protects the unauthorised use of
your phone. The default security code is set to ‘

0000

’

and the security code is required to delete all phone
entries and to activate the 

Reset settings

menu. Also,

the security code is required to enable or disable the
phone lock function to prevent unauthorised use of the
phone. The security code default setting can be 
modified from the 

Security settings

menu. 

Getting started

20