LG B2150 - Инструкция по эксплуатации - Страница 84

1-5  Rejecting an Incoming Call

When not in a call you can reject an incoming call without
answering it by simply pressing the 

E

[End].

When in a call you can reject an incoming call by pressing
the 

<

[Menu] key and selecting 

Multiparty/Reject

or by

pressing 

E

[End] key.

1-6  Muting the Microphone

You can mute the microphone during a call by pressing
the 

<

[Options] key then selecting 

Mute

. The handset

can be unmuted by pressing the 

<

[Unmute].

When the handset is muted, the caller cannot hear you,
but you can still hear them.

1-7  Switching DTMF Tones on During a Call

To turn DTMF tones on during a call, for example, to allow
your handset to make use of an automated switchboard,
select 

<

[Options], then 

DTMF On

. DTMF tones can be

turned off the same way.

1-8  Calling up Messages and SIM Tool kit main menu

The Messages and SIM Tool kit main menu options can
be reached from the in-call menu by selecting 

<

[Options]. SIM Tool kit menu is shown only when SIM in
the handset supports SIM Tool kit service.

2  Multiparty or Conference Calls

The multiparty or conference service provides you with
the ability to have a simultaneous conversation with more
than one caller, if your network service provider supports
this feature.

A multiparty call can only be set up when you have one
active call and one call on hold, both calls having been
answered. Once a multiparty call is set up, calls may be
added, disconnected or separated (that is, removed from
the multiparty call but still connected to you) by the
person who set up the multiparty call.

The maximum callers in a multiparty call is five. Once
started, you are in control of the multiparty call, and only
you can add calls to the multiparty call.

2-1  Making a Second Call

You can make a second call while you are already in a
call. To do this, enter the second number and press 

S

[Send]. When you get second call the first call is
automatically put on hold. You can swap between calls by
selecting 

<

[Options] then 

Swap

.

2-2  Setting up a Multiparty Call

You can connect a call on hold to the currently active call
to form a multiparty call by selecting 

<

[Options] then

Multiparty / Join all.

B2250

17