Системные блоки HP DL360 Gen10 (P19775-B21) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
QuickSpecs
HPE ProLiant DL360 Gen10 Server
Technical Specifications
Page 40
Extended Ambient
Operating Support
For approved hardware configurations, the supported system inlet
range is extended to be: 40° to 45°C (104° to 113°F) at sea level
with an altitude derating of 1.0°C per every 125 m (1.8°F per every
410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft).
The approved hardware configurations for this system are listed at
the URL:
http://www.hpe.com/servers/ashrae
System performance may be reduced if operating in the extended
ambient operating range or with a fan fault.
Relative Humidity
(non-condensing)
Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb
temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change rate
is 457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient
environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared
in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels. Please have your HPE
representative provide information from the HPE EMESC website for further technical details
regarding the configurations listed below.
Configuration
SKU
Entry
Base
Performance
Idle
LWAd
5.1 B
5.1 B
5.2 B
LpAm
32.5 dBA
34.5 dBA
35.9 dBA
Operating
LWAd
5.3 B
5.2 B
5.9 B
LpAm
35.5 dBA
38.1 dBA
45.1 dBA
NOTE:
Acoustics levels presented here are generated by the test configuration only. Acoustics
levels will vary depending on system configuration. Values are subject to change without
notification and are for reference only.
Emissions Classification
(EMC)
To view the regulatory information for your product, view the Safety and Compliance Information for
Server, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise
Support Center:
http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts
For information on the HPE Smart Array E208i-a SR Gen10 Controller please refer to their
For information on the HPE Smart Array E208i-a SR G10 LH Controller please refer to their
For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their
For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their
For information on the HPE Smart Array P408i-a SR Gen10 Controller please refer to their
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
