Шуруповерты STATUS DP700 2142501 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
DP700
A
2
3
1. INTENDED USE
2. SAFETY ADVICE
INTENDED USE
SAFETY ADVICE
EN
This power tool is supplied from single-phase alternating current mains only. It is
double insulated according to EN 60745-1 and IEC 60745 and can be connected to
grounded or not grounded sockets.
This power tool is radio suppressed in compliance with EMC Directive.
These power tools are designed for drilling in concrete (or various brittle materials),
steel, wood, etc.
WARNING!
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.Save all warnings
and instructions for future reference. The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
•
Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool
will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for out-
door use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is unavoidable, use a residual curre-
nt device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
•
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
•
Use personal protective equipment. Always wear eye protection.
Protective equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
1
5
4
6
8
7
2
3
