Ryobi R18DDBL-225B - Инструкция по эксплуатации - Страница 4

English

2

based products, penetrating oils, etc., come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken or destroy plastic.

■

Always wear safety goggles or safety glasses with side 
shields during power tool operation or when blowing 
dust. If operation is dusty, also wear a dust mask.

■

For greater safety and reliability, all repairs should be 
performed by an authorised service centre.

LUBRICATION

All of the bearings in the product are lubricated with a 
sufficient amount of high grade lubricant for the life span of 
the product under normal operating conditions. Therefore, 
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories 
and packaging should be sorted for 
environmental friendly recycling.

e-Torque control

e-Torque control helps regulate the power output of 
the product to avoid over-driving screws and damaging 
materials. To achieve a flush finish, it is best to select a 
low setting before commencing screw driving. When the 
e-Torque control engages, the e-Torque selector LED 
and e-Torque indicator LED will flash and the product will 
automatically shut down.
If more power is required to drive the screw flush, the 
e-Torque control can be adjusted accordingly. e-Torque 
control only operates in screw driving mode, it has no effect 
on drilling mode.
The product has a memory function that stores torque 
settings. When switching from drilling to screwdriving 
mode, the memory function restores previously used 
torque settings. The e-Torque selector and indicator LEDs 
will flash once previously used torque setting is reached.

SYMBOLS

Safety alert

CE conformity

No-load speed

EurAsian Conformity Mark

Please read the instructions carefully 
before starting the product.

Ukrainian mark of conformity

Chuck capacity

Drilling without impact

Torque, maximum

Torque, minimum

Speed, minimum

Speed, maximum

Waste electrical products should not 
be disposed of with household waste. 
Please recycle where facilities exist. 
Check with your local authority or 
retailer for recycling advice.