Ryobi R12SD-L13G - Инструкция по эксплуатации - Страница 3

English

1

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

DRILL DRIVER SAFETY WARNINGS

a) 

Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

b) 

Hold power tool by insulated gripping surfaces, 
when performing an operation where the cutting 
accessory may contact hidden wiring.

 Cutting 

accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock.

c) 

Hold power tool by insulated gripping surfaces, 
when performing an operation where the fastener 
may contact hidden wiring.

 Fasteners contacting a 

“live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.

Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps 
or tape. Do not transport batteries that are cracked or 
leaking. Check with the forwarding company for further 
advice.

INTENDED USE

This product is not intended for use by persons (including 
children) with reduced physical, sensory or mental 
capabilities. It is only intended to be used by responsible 
adults who have read the safety instructions and 
understand the hazards involved. You may use this product 
for the purposes listed below:

■

Drilling into a variety of materials:

–

wood

–

metal

–

plastic

–

ceramic

■

Driving and removing screws

Do not use this product in any way other than those stated 
for intended use.

MAINTENANCE

 WARNING

The product should never be connected to a power supply 
when you are assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product will prevent 
accidental starting that could cause serious injury.

a)  When servicing, use only identical replacement parts. 

Use of any other parts may create a hazard or cause 
product damage.

b)  Do not use compressed air to blow dust/dirt from any 

power tool. Serious eye injury could result. Use a cloth, 
brush or vacuum to remove dust and dirt.

c)  Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact 
with plastic parts. They contain chemicals that can 
damage, weaken or destroy plastic.

d)  Avoid using solvents when cleaning plastic parts. Most 

plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

e)  For greater safety and reliability, all repairs should be 

performed by an authorised service centre.

LUBRICATION

All of the bearings in the product are lubricated with a 
suf

fi

 cient amount of high grade lubricant for the life span of 

the product under normal operating conditions. Therefore, 
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories and 
packaging should be sorted for environmental-
friendly recycling.

SYMBOLS

Safety alert

No-load speed

CE conformity

EurAsian Conformity Mark

Read operator’s manual

Waste electrical products should not be 
disposed of with household waste. Please 
recycle where facilities exist. Check with your 
local authority or retailer for recycling advice.