Metabo SSD 18 LTX 200 BL 602396800 - Инструкция по эксплуатации - Страница 11

ENGLISH

en

11

Only use screwdriving bits with such plug-in 

ends:

The screwdriving bit used must match the 

screw.
Damaged screwdriving bits must not be used.

Mount the machine on the screw, ensuring it is 

aligned straight. 
The screwdriving process has two elements: 

inserting the screw

 and 

tightening the screw with the percussion mech-

anism.

The tightening torque depends on the impact dura-

tion.

With an impact duration of approx. 5 seconds, the 

maximum tightening torque has been reached.
The torque curve depends on the type of applica-

tion:
With a hard screwdriving application (screw-

couplings in hard material such as metal), maximum 

tightening torque is already reached after a short 

impact duration (a).
With a soft screwdriving application (screw-

couplings in soft material such as wood), a longer 

impact duration (b) is required.
Recommendation: determine the correct impact 

duration by carrying out trial screwdriving. 

Caution!

 With 

small screws, 

maximum torque can 

be reached even below an impact duration of 0.5 

seconds.
- This is why the duration of the screwdriving 

process must be monitored exactly. 

- Set a suitable position on the setting wheel (7) 

(see chapter 6.4).

- Adjust the tightening torque by pressing firmly or 

lightly on the trigger (4), ensuring that the screw is 

not damaged or that the screw head does not tear 

off.

Only use original Metabo battery packs and Metabo 

accessories.
Use only accessories that fulfil the requirements 

and specifications listed in these operating instruc-

tions.
See page 4.

A Chargers

B Battery packs with different capacity

Only use battery packs with the appropriate 

voltage for your power tool.

C Screwdriving bits

For a complete range of accessories, see 

www.metabo.com or the catalogue.

Repairs to electrical tools must be carried out 

by qualified electricians ONLY! 

If you have Metabo electrical tools that require 

repairs, please contact your Metabo service centre. 

For addresses see www.metabo.com.
You can download spare parts lists from 

www.metabo.com.

Observe national regulations on environmentally 

compatible disposal and on the recycling of disused 

machines, packaging and accessories.
Battery packs must not be disposed of with regular 

waste. Return faulty or used battery packs to your 

Metabo dealer!
Do not allow battery packs to come into contact with 

water!

Only for EU countries: Never dispose of 

power tools in your household waste! In 

accordance with European Guideline 2012/

19/EU on used electronic and electric equipment 

and its implementation in national legal systems, 

used power tools must be collected separately and 

handed in for environmentally compatible recycling. 

Before disposal, discharge the battery pack in the 

power tool. Prevent the contacts from short-circu-

iting (e. g. by protecting them with adhesive tape).

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U

= Voltage of battery pack

n

0

= No-load speed

S

= Impact frequency

H

= Machine tool attachment

m

= Weight (with smallest battery pack)

M

P

= max. tightening torque (power mode)

Measured values determined in conformity with 

EN 60745.

Direct current

7. Use

9,5 mm (3/8“)

8. Accessories

9. Repairs

10. Environmental Protection

11. Technical specifications