Metabo SSD 18 LT 200 BL 602397840 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

10

- arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well-

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials, such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- do not direct the escaping particles and the 

exhaust air stream towards yourself or nearby 

persons or towards dust deposits,

- use an extraction unit and/or an air purifier,

- ensure good ventilation of the workplace and keep 

it clean using a vacuum cleaner. Sweeping or 

blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush protective gear.

See page 2.

1 Square attachment for 1/2“ tools *

2 Hexagon socket attachment for hexagon 

screwdriving bits*

3 Locking sleeve*

4 Rotation selector switch / Transporting safety 

device

5 Trigger

6 Handle (gripping surface)

7 LED  light

For working in badly lit areas. The LED light 

lights up when the machine is switched on.

8 Button for speed and tightening torque 

selection

9 Battery  pack  *

10 Battery pack release button 

11 Capacity indicator button *

12 Capacity and signal indicator *

13 Belt hook (attach as shown) *
* depending on the features / model

Remove the battery pack from the machine 

before any adjustment or maintenance is 

carried out. Make sure that the tool is switched off 

before fitting the battery pack.

6.1 Battery pack

Charge the battery pack (9) before use. Recharge 

the battery pack if performance diminishes.
Instructions on charging the battery pack can be 

found in the operating instructions of the Metabo 

charger.

Li-Ion battery packs “Li-Power, LiHD“

 have a 

capacity and signal indicator (12):

- Press the button (11), the LEDs indicate the 

charge level.

- The battery pack is almost empty and must be 

recharged if one LED is flashing.

Removing:

Press the battery pack release button (10) and pull 

the battery pack (9) forwards.

Inserting:

Slide in the battery pack (9) until it engages.

6.2 Setting the direction of rotation, 

engaging the transporting safety device 

(switch-on lock)

Only operate the rotation selector switch / 

transporting safety device (4) when the motor 

is at standstill!

Actuate the rotation selector switch / Engage the 

transportation lock  (4).

R

= Clockwise setting 

(drive in screws)

L

= Anti-clockwise setting 

(undo screws)

0

= middle position: transportation safety device

(Switch-on lock) set

6.3 Switching on and off

Switching on:

 press the trigger switch (5).

Switching off

: Release the trigger (5).

6.4 Speed / tightening torque

The speed and tightening torque are connected 

directly. The lower the speed, the lower the 

tightening torque.
The tightening torque is influenced in two ways:
1) Select maximum tightening torque.
You can select one of three tightening torque 

settings by pressing the button (8). The maximum 

tightening torques can be found in the table on 

page 3 (M

1

, M

2

, M

3

).

The lights indicate which setting is selected.

1 = min. tightening torque

2 = medium tightening torque

3 = max. tightening torque

5. Overview

6. Initial Operation/Setting