Metabo SBE 1000 600866500 - Инструкция по эксплуатации - Страница 13

ENGLISH

en

13

Original instructions

We declare under our sole responsibility: These 

impact drills, identified by type and serial number 

*1), comply with all relevant requirements of the 

directives *2) and standards *3). Technical file at *4) 

-  

Fig. P

The machine is suitable for drilling, without impact, 

in metal, wood, plastic and similar materials and for 

impact drilling in concrete, stone and similar mate-

rials. It is also suitable for thread tapping and for 

screwdriving (not SB 710).
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 

documents.

For your own protection and for the 

protection of your power tool, pay atten-

tion to all parts of the text that are marked 

with this symbol!

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 

parts of the electrical tool "live" and could give the 

operator an electric shock.
Pull the plug out of the plug socket before any 

adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.

Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).
Smaller workpieces must be secured such that they 

are not carried along with the drill bit when drilling 

(e.g. by clamping in a vice or on a work bench with 

screw clamps).
Keep hands away from the rotating tool! Remove 

chips and similar material only with the machine at 

standstill.
Metabo S-automatic safety clutch. When the safety 

clutch responds, switch off the machine immedi-

ately! If the tool jams or catches, the power supply 

to the motor is restricted. Due to the strong force 

which can arise, always hold the machine with both 

hands using the handles provided, stand securely 

and concentrate.
The Metabo S-automatic safety clutch must not be 

used for torque control.
Caution with hard screwdriving (driving of screws 

with either a metric or an imperial thread into steel)! 

The head of the screw may rip off or high restoring 

torques may be incurred at the handle.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic 

such as oak and beech dust especially in conjunc-

tion with additives for wood conditioning (chromate, 

wood preservative). Material containing asbestos 

must only be treated by specialists.

- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you 

want to work with.

Illustrations are provided at the beginning of the 

operating instructions.

Symbol explanation:

 Normal drilling/Drill bit

 Impact drilling

 Movement direction

 Driving screws/Screw
 Slow
 Fast

 Thread tapping/Thread tapper

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Figures