Metabo PowerMaxx SSD 600093890 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original instructions

We declare under our sole responsibility: These 

cordless impact drivers, identified by type and serial 

number *1), comply with all relevant requirements of 

the directives *2) and standards *3). Technical file 

at *4) - see page 3.

The cordless impact screwdriver is suitable for 

driving in and removing screws.
The user bears sole responsibility for damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 Cutting accessory contacting a "live" wire 

may make exposed metal parts of the power tool 

"live" and could give the operator an electric shock.
Remove the battery pack from the machine before 

any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the 

machine is switched off.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

(e.g. using a metal detector).

Protect battery packs from water and 

moisture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective Li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical treatment 

immediately.
Only screwdriving bits suitable for the impact 

screwdriver must be used.
Take care when driving in long screws - risk of 

slipping.
Mount the machine on the screw only when it is 

switched off.

Wear ear protectors.

 Exposure to noise can cause 

hearing loss.
Materials that generate dusts or vapours that may 

be harmful to health (e.g. asbestos) must not be 

processed.
LED (3): Do not view LEDs directly through optical 

instruments, LED class 1M, classified as per 

DIN EN 60825-1: 2003, wavelength: 400-780 nm; 

t

imp

=300 µs, 5 lm.

See page 2.

1 Hexagon socket attachment for hexagon 

screwdriving bits

2 Locking  sleeve

3 LED  light

For working on dimly lit areas. The LED lights 

light up when the machine is switched on.

4 Rotational direction switch / Transporting safety 

device

5 Trigger

6 Button for battery pack release

7 Battery pack

Remove the battery pack from the machine 

before any adjustment or maintenance is 

carried out. Before fitting the battery pack, make 

sure that the machine is switched off.

6.1 The machine's multifunctional monitoring 

system

If the machine switches off automatically, the 

machine electronics have activated automatic 

protection mode. A warning signal sounds 

(continuous beeping). The beeping stops after a 

maximum of 30 seconds or when the trigger is 

released (5).

In spite of this protective function, overloading 

is still possible with certain applications and 

can result in damage to the machine.

1. Conformity Declaration

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview

6. Initial Operation/Setting