Metabo BS 18 LTX Impuls 602191500 - Инструкция по эксплуатации - Страница 11

ENGLISH 

en

11

Original instructions

On our own responsibility, we hereby declare that 

these battery-powered drilling screwdrivers and 

impact drills, identified by type and serial number 

*1), meet all relevant requirements of directives *2) 

and standards *3). Technical documents at *4) - 

Fig. M.

The drills and impact drills are suitable for drilling in 

metal, wood, plastic and similar materials, and also 

for screwdriving and thread tapping.
The impact drills are also suited for drilling in 

masonry, brickwork and stone.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your power tool, pay atten-

tion to all parts of the text that are marked 

with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Wear ear protectors with impact drills 

(machines with the designation SB). 

Exposure 

to noise can cause hearing loss.

Use auxiliary handles supplied with the tool 

(depending on the model). 

Loss of control can 

cause personal injury.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory/fastener may contact 

hidden wiring.

 Cutting accessory/fasteners 

contacting a "live" wire, may make exposed metal 

parts of the power tool "live" and could give the 

operator an electric shock.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

by using a metal detector).

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention imme-

diately.
Remove the battery pack from the machine before 

any adjustments, conversions or servicing are 

performed.
Before fitting the battery pack, make sure that the 

machine is switched off.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic, 

such as oak and beech dust, especially in 

conjunction with additives for wood conditioning 

(chromate, wood preservative). Material containing 

asbestos must only be treated by specialists.

- Use a dust extraction device where possible.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you 

want to work with.

Secure the workpiece against slipping, e.g. with the 

help of clamping devices.
LED lights (14): Do not observe the LED radiation 

directly with optical instruments.

Illustrations are provided at the beginning of the 

operating instructions.

Symbol explanation:

Movement direction
Slow
Fast
First gear
Second gear
Screws
Drill bit
Without torque limitation

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions

5. Figures