Metabo BS 18 LT Quick 602104840 - Инструкция по эксплуатации - Страница 11

ENGLISH

en

11

On our own responsibility, we hereby declare that 

these battery-powered drilling screwdrivers and 

impact drills, identified by type and serial number 

*1), meet all relevant requirements of directives *2) 

and standards *3). Technical documents at *4) - 

Fig. M.

The drills and impact drills are suitable for drilling in 

metal, wood, plastic and similar materials, and also 

for screwdriving and thread tapping.
The impact drills are also suited for drilling in 

masonry, brickwork and stone.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your power tool, pay atten-

tion to all parts of the text that are marked 

with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Wear ear protectors with impact drills 

(machines with the designation SB). 

Exposure 

to noise can cause hearing loss.

Hold tool by insulated gripping surfaces, when 

performing an operation where the cutting 

accessory may contact hidden wiring.

 If the 

cutting accessory contacts a "live" wire, exposed 

metal parts of the electrical tool may become "live" 

and give the operator an electric shock.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

by using a metal detector).

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention imme-

diately.
If the machine is defective, remove the battery pack 

from the machine.
Remove the battery pack from the machine before 

any adjustments, conversions or servicing are 

performed.
Before fitting the battery pack, make sure that the 

machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at a standstill.
Secure the workpiece to prevent slipping or rotation 

(e.g. by securing with screw clamps).
LED lights (11): Do not observe the LED radiation 

directly with optical instruments.

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well 

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).
Collect the particles generated at the source, avoid 

deposits in the surrounding area. 

Original instructions

1. Declaration of Conformity

2. Specified Use

3. General safety instructions

4. Special Safety Instructions