Metabo BS 18 Li 602116530 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

On our own responsibility, we hereby declare that 

these battery-powered drilling screwdrivers and 

impact drills, identified by type and serial number 

*1), meet all relevant requirements of directives *2) 

and standards *3). Technical documents at *4) - 

Fig. J

The drills and impact drills are suitable for drilling in 

metal, wood, plastic and similar materials, and also 

for screwdriving and thread tapping.
The impact drills are also suited for drilling in 

masonry, brickwork and stone.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Wear ear protectors with impact drills 

(machines with the designation SB). 

Exposure 

to noise can cause hearing loss.

Hold tool by insulated gripping surfaces, when 

performing an operation where the cutting 

accessory may contact hidden wiring.

 Cutting 

accessory contacting a "live" wire may make 

exposed metal parts of the electrical tool "live" and 

could give the operator an electric shock.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).

Protect battery packs from water and mois-

ture!

Do not expose battery packs to naked flame!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short-circuit battery packs!

Slightly acidic, flammable fluid may leak from 

defective li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention imme-

diately.
Remove the battery pack from the machine before 

any adjustments, conversions or servicing are 

performed.
Before fitting the battery pack, make sure that the 

machine is switched off.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic 

such as oak and beech dust especially in 

conjunction with additives for wood conditioning 

(chromate, wood preservative). Material containing 

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you 

want to work with.

Secure the workpiece against slipping, e.g. with the 

help of clamping devices.
LED (9): Do not view LEDs directly through optical 

instruments, LED class 1M, classified as per DIN 

EN 60825-1: 2003, wavelength: 400-700 nm; 

300 µs.

Illustrations are provided at the beginning of the 

operating instructions.

Symbol explanation:

Movement direction
Slow
Fast
First gear
Second gear
Screws
Drill bit
Without torque limitation
Impact drilling 

Original instructions

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Figures