Metabo BE 75-16 600580000 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

7

Original instructions

We, being solely responsible, hereby declare that 

these drills, identified by type and serial number *1), 

meet all relevant requirements of directives *2) and 

standards *3). Technical documents for *4) - see 

page 3.

The drill is suitable for non-impact drilling into metal, 

wood, plastic and similar materials. It is also suit-

able for thread tapping and screwdriving.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention regula-

tions and the enclosed safety information must be 

observed.

For your own protection and for the 

protection of your power tool, pay atten-

tion to all parts of the text that are marked 

with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by the insulated gripping 

surfaces when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 If the cutting accessory 

contacts a "live" wire, exposed metal parts of the 

electrical tool may become "live" and give the oper-

ator an electric shock.
Pull the plug out of the plug socket before carrying 

out any adjustments or servicing.
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

by using a metal detector).
Smaller workpieces must be secured to prevent 

them from being carried along with the drill bit 

during the drilling process (e.g. by clamping in a 

vice or on a work bench with screw clamps).

Keep hands away from the rotating tool! Remove 

chips and similar material only when the machine is 

at a standstill.
Metabo S-automatic safety clutch. When the safety 

clutch responds, switch off the machine immedi-

ately! If the tool jams or catches, the power supply 

to the motor is restricted. Due to the strong force 

that can be generated, always hold the machine 

with both hands using the handles provided, stand 

in a steady position and concentrate on the work 

being carried out.
The Metabo S-automatic safety clutch must not be 

used for torque control.
Caution when carrying out hard screwdriving 

(driving of screws with either a metric or an imperial 

thread into steel)! The head of the screw may be 

ripped off or high restoring torques may occur on 

the handle.

Reducing dust exposure:

Some of the dust created using this power tool 

may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 

defects or other reproductive harm. Some 

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement, 

etc.), additives for wood treatment (chromate, wood 

preservative), some types of wood (like oak and 

beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a 

well ventilated area and wear protective equipment, 

such as dust masks that are specially designed to 

filter out microscopic particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

Vacuum or wash protective clothing. Do not blow, 

beat or brush.

1. Declaration of Conformity

2. Specified conditions of use

3. General safety instructions

4. Special Safety Instructions