Metabo B 32/3 600323000 - Инструкция по эксплуатации - Страница 10

ENGLISH

en

9

Original instructions

We, being solely responsible, hereby declare that 

these drills, identified by type and serial number *1), 

meet all relevant requirements of directives *2) and 

standards *3). Technical documents for *4) - see 

page 3.

This machine is designed for drilling in metal, wood, 

plastics, and similar materials.
The maximum permissible tool diameter when 

drilling with twist drill bits in steel is 32 mm.
The user bears sole responsibility for damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Before using this power tool, carefully read through 

and familiarise yourself with all the  enclosed safety 

information and the instructions. Keep all enclosed 

documentation for future reference, and pass on 

your power tool only together with this 

documentation.

For your own protection and for the 

protection of your power tool pay 

attention to all parts of the text that are 

marked with this symbol!

Wear ear protectors. 

Exposure to noise can 

cause loss of hearing.

Use the additional handles supplied with the 

tool. 

Loss of control can lead to injuries.

Hold the power tool by insulated gripping 

surfaces when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 

parts of the power tool "live" and shock the operator.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).
Always work with the additional handle correctly 

installed.

Always hold the machine with both hands using the 

handles provided, stand securely and concentrate.
The machine must only be guided with two hands, 

or placed on the drill stand.
High forces are released if the tool jams or catches. 

Always hold the machine firmly with both hands on 

the handle and additional handle, stand in a safe 

position and concentrate.

Wear protective goggles.
Wear working gloves.
Never work on ladders or similar objects. Ensure 

you stand in a safe position and keep your balance 

at all times.
Pull the plug out of the plug socket before any 

adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 

switch when the plug is removed from the mains 

socket or in case of a power cut.

Switch the machine off if stops for any reason.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at standstill.

Smaller workpieces must be secured such that 

they are not carried along with the drill bit when 

drilling

 (e.g. by clamping in a vice or on a work 

bench with screw clamps).
Incorrect handling can result in injury to the operator 

and damage to the machine. Never subject the 

machine to loads that cause it to stop.
Use only original Metabo accessories.

Reducing dust exposure:

Some of the dust created using this power tool 

may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 

defects or other reproductive harm. Some 

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement, 

etc.), additives for wood treatment (chromate, wood 

preservative), some types of wood (like oak and 

beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a 

well ventilated area and wear protective equipment, 

such as dust masks that are specially designed to 

filter out microscopic particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area. 
Use suitable accessories for special work. In this 

way, fewer particles enter the environment in an 

uncontrolled manner.
Use a suitable extraction unit.

1. Conformity Declaration

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions