Шуруповерты Makita UT1401 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Care and Maintenance
Repairs shall only be carried out by qualified staff trained and experienced in this
area. The tool shall be inspected by a skilled electrician after every repair. The
power tool is designed to require only a minimum of maintenance and care.
However, the following work shall be carried out and/or the following parts shall
be inspected regularly:
•
Do always keep the power tool and the ventilation slots clean.
•
Make sure that no foreign objects get into the power tool.
•
If the tool breaks down, the repair shall only be carried out by an authorised
shop.
Information on noise and vibration
Measured values determined according to EN 60745
The A-weighted noise level of the tool is typically:
UT 1401
UT 1600
110 V ~
230 V ~
Sound pressure level (L
PA
)
86 dB(A)
85 dB(A)
87 dB(A)
Sound power level (L
WA
)
97 dB(A)
96 dB(A)
98 dB(A)
Uncertainty K
3 dB
3 dB
Wear ear protection!
UT 1401
UT 1600
110 V ~
230 V ~
Hand-arm vibration
0,5 m/s²
0,75 m/s²
1,03 m/s²
Uncertainty K
1,5 m/s²
1,5 m/s²
Measured values determined according to EN 60745
The vibration emission level indicated in these instructions has been measured in
accordance with a standardised test method given in EN 60745 and can be used
to compare one tool with another. It is also suitable for a preliminary evaluation of
the vibration emission level.
The vibration emission level set out in these instructions presents the main
applications of the power tool. If the power tool is used for other applications or
with different tools or if maintenance is not sufficient, the vibration emission level
may vary. This may lead to a significantly higher vibration emission level during
the whole working period.
In order to be accurate, an estimation of the level of exposure to vibration should
also take into account the times when the tool is switched off and when it is
running but not actually used. This may significantly reduce the level of exposure
to vibration during the whole working period.
Additional protective measures in order to protect the operator from vibration
effects, e.g. maintenance of power tools and tools, keeping hands warm,
organisation of work processes, shall be determined.
