Шуруповерты Makita UT1401 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Technical data
UT 1401
Rated voltage:
110 V ~
230 V ~
110 V ~
Power input:
1050 W
1300 W
1500 W
No load speed:
I
II
0–410 rpm
0–740 rpm
0–400 rpm
0–730 rpm
0–450 rpm
0–1000 rpm
Frequency:
50 Hz
Tool holder:
M 14
Safety class:
II
Safety degree:
IP 20
Weight according to EPTA
Procedure 01/2003:
5,5 kg
This manual shall be subject to modification without prior notice in the course of
developments and technical progress.
Note:
The technical data may differ depending on the country.
Symbols
The following symbols are used for the equipment. It is important to know their
meaning before you use the tool.
Intended use
The mixer
UT 1401
is used to stir and mix prefab plaster, gypsum, lime, concrete
and other building materials of medium and high viscosity in batches up to 50 kg.
The diameter of the stirrers that are used should not exceed 140mm.
The mixer
UT 1600
is designed for use in mixing material of high viscosity, such
as prefab mortar and plaster, cement, lime, concrete, quartz-
screed, pastes, sealing compounds as well as gypsum and granulates in batches
up to 80 kg. The diameter of the mixing agitators must not exceed a value of
180mm.
The user shall be responsible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
enclosed shall be observed.
ENGLISH
Read instructions
Work with concentration and care.
Keep your workplace clean and avoid hazardous situations.
Precautions shall be taken to protect operators.
Double protective insulation
UT 1600
110 V ~
230 V ~
00 W
1800 W
0 rpm
0 rpm
0–440 rpm
0–970 rpm
7,1 kg
This manual shall be subject to modification without prior notice in the course of
The following symbols are used for the equipment. It is important to know their
prefab plaster, gypsum, lime, concrete
and other building materials of medium and high viscosity in batches up to 50 kg.
The diameter of the stirrers that are used should not exceed 140mm.
is designed for use in mixing material of high viscosity, such
-filled epoxy resins,
screed, pastes, sealing compounds as well as gypsum and granulates in batches
mixing agitators must not exceed a value of
The user shall be responsible for damages caused by inappropriate use.
Generally accepted accident prevention regulations and the safety instructions
Keep your workplace clean and avoid hazardous situations.
