Шуруповерты Makita DHP459SYE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Speed change lever
7-1. Action mode changing ring
7-2. Adjusting ring
7-3. Graduation
7-4. Arrow
8-1. Action mode changing ring
8-2. Adjusting ring
8-3. Graduation
8-4. Arrow
9-1. Sleeve
10-1. Groove
10-2. Hook
10-3. Screw
11-1. Bit holder
11-2. Bit
12-1. Vent
13-1. Blow-out bulb
SPECIFICATIONS
Model DHP459
Concrete 13
mm
Steel 13
mm
Wood 38
mm
Wood screw
6 mm x 75 mm
Capacities
Machine screw
M6
High (2)
0 - 1,500
No load speed (min
-1
)
Low (1)
0 - 400
High (2)
0 - 22,500
Blows per minute
Low (1)
0 - 6,000
Overall length
192 mm
Rated voltage
D.C. 18 V
Battery cartridge
BL1815 / BL1815N / BL1820
BL1830 / BL1840 / BL1850
Net weight
1.5 kg
1.7 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE079-1
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 8 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
