Шуруповерты GRAPHITE 58G214 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
20
TECHNICAL PARAMETERS
DANE ZNAMIONOWE
Cordless drill
Parameter
Value
Battery voltage
14,4 V DC
Battery type
Li-Ion
Battery capacity
1500 mAh
Range of idle rotational speed
gear I
0-350 min
-1
gear II
0-1150 min
-1
Range of quick release chuck
1-10 mm
Torque control range
1 – 19 plus drilling
Max. torque (soft drive)
21 Nm
Max. torque (hard drive)
35 Nm
Protection class
III
Weight
1,12 kg
Year of production
2017
Charger
Parameter
Value
Supply voltage
230 V AC
Power supply frequency
50 Hz
Charging voltage
17 V DC
Max. charging current
1500 mA
Battery charging time
75 min
Protection class
II
Weight
0,18 kg
Year of production
2017
NOISE AND VIBRATIONS DATA
Information on noise and vibrations
The emitted noise levels, such as the level of emitted acoustic pressure Lp
A
and the level of acoustic power
Lw
A
, and the measurement uncertainty K are given below in the instruction in accordance with the EN
60745 standard.
The vibration values a
h
and the measurement uncertainty K, determined in accordance with the EN 60745-
2-1 standard, are given below.
The vibration level given below in this instruction was measured in accordance with a measurement
procedure set forth in the EN 60745 standard and can be used for comparing power tools. It can also be
used for preliminary evaluation of exposure to vibrations.
The vibration level given here is representative for the basic uses of the power tool. If the power tool is
used for other purposes or with other bits, or if the power tool is not maintained properly, the vibration
level may change. Also, these conditions may also result in an increased exposure to vibrations during the
entire work period.
In order to accurately estimate exposure to vibrations, one must consider periods when the power tool
is switched off or when it is switched on and not used for work. This way, the total exposure to vibrations
may turn out to be much lower. One must implement additional safety measures in order to protect the
user from the consequences of vibrations, such as maintenance of the power tool and of the working tools,
ensuring proper temperature of the hands, and proper organization of work.
Sound pressure level: Lp
A
= 61,9 dB (A) K=3dB (A)
Sound power level: Lw
A
= 72,9 dB (A) K=3dB (A)
Vibration acceleration a
h
= 1,068 m/s
2
K = 1,5 m/s
2
