FLEX ID 1/4″ 18.0-EC/5.0 Set 504920 - Инструкция по эксплуатации - Страница 22

DD 2G 18.0-EC / PD 2G 18.0-EC / IW 1/2" 18.0-EC / ID 1/4" 18.0-EC

22

Instructions for use

Before initial operation



Unpack the power tool and accessories 

and check that no parts are missing or 

damaged.



Attach the belt clip and bit holder with 

the enclosed fastening screw.

NOTE

The batteries are not fully charged on 

delivery. Prior to initial operation, charge 

the batteries fully. See “Charger/Charging 

process”.

Fitting/removing the auxiliary 

handle (PD/DD 2G 18.0-EC)

CAUTION! 

Use auxiliary handles if these are supplied 

with the power tool. The loss of control may 

result in injuries.

Changeable drill chuck BF 18.0

-

EC

CAUTION! 

Before carrying out any work on the power 

tool, move the direction preselector switch (2) 

to the middle position.

Assemble



Pull unlocking ring forwards (1.) and 

press the drill chuck all the way onto the 

tool holder (2.).



Release unlocking ring. Check that the 

drill chuck is locked in position.

Disassemble



Pull unlocking ring forwards and remove 

the drill chuck.

Inserting the tools

Drill bits with a diameter of 1.5–13 mm, 

½

" screwdriver bits and 

½

" bit holders are 

securely held in the drill chuck.



Grip the power tool firmly with one hand 

and turn the chuck with the other hand.

– Turn counterclockwise to open the chuck 

further. 

– Turn clockwise to close the chuck.



Insert the tool.



Close the chuck fully.

NOTE

Carry out a test run to check that the tool is 

chucked in the centre.