FERM IND PDM1060P_K 5010000018 - Инструкция по эксплуатации - Страница 6

6

EN

Clean the machine casings regularly with a soft 
cloth, preferably after each use. Make sure that 
the ventilation openings are free of dust and 
dirt. Remove very persistent dirt using a soft 
cloth moistened with soapsuds. Do not use any 
solvents such as gasoline, alcohol, ammonia, 
etc. Chemicals such as these will damage the 
synthetic components.

Carbon brush

If the carbon brushes are worn, the carbon 
brushes must be replaced by the customer 
service department of the manufacturer or a 
similarly qualified person.

Only use the correct original type of 
carbon brushes.

If the supply cord is damaged, it must be replaced 
by the manufacturer, its service agent or similarly 
qualified persons in order to avoid a hazard.

Defects

The machine should be regularly inspected for 
the following possible defects, and repaired if 
necessary.
•   Damage to power cord
•   Broken on/off switch
•   Short  circuiting
•   Damaged moving parts

WARRANTY

The warranty conditions can be found on the 
separately enclosed warranty card.

ENVIRONMENT

 Faulty and/or discarded electrical or 
electronic apparatus have to be collected 
at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic 
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic 
Equipment and its implementation into national 
right, power tools that are no longer usable must 
be collected separately and disposed of in an 
environmentally friendly way.

The product and the user manual are subject 
to change. Specifications can be changed 
without further notice.