Шуруповерты FERM IND PDM1048P 5010000012 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
EN
ELECTRIC DRILL
PDM1048P
Thank you for buying this FERM product. By doing
so you now have an excellent product, delivered
by one of Europe’s leading suppliers. All products
delivered to you by Ferm are manufactured
according to the highest standards of performance
and safety. As part of our philosophy we also
provide an excellent customer service, backed
by our comprehensive warranty. We hope you will
enjoy using this product for many years to come.
1. SAFETY WARNINGS
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury.
Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Risk of personal injury.
Risk of electric shock
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
Wear safety goggles. Wear hearing
protection.
Wear a dust mask.
Double insulated
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
ADDITIONAL SAFETY WARNINGS
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord
.
Cutting
accessory
contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could
give the operator an electric shock.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate label.
Class II machine - Double insulation - You
don’t need any earthed plug.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
2. MACHINE INFORMATION
Intended use
Your electric drill has been designed for drilling
holes in wood, metal and plastics.
Technical specifications
Mains voltage
220-240 V~
Mains frequency
50 Hz
Power input
450W
No-load speed
0-3.300 /min
Max. chuck size
10 mm
