Felisatti MKF1600/VE2 139260270 - Инструкция по эксплуатации - Страница 4

TECHNICAL DATA 

Double rod mixer 

MKF1200/VE2

MKF1600/VE2

Rated power 

W 

1200

1600

No load speed 

rpm 

120-450/245-825

105-420/215-865

Work shaft thread 

ISO 

5/8”x16

5/8”x16

Torque Nm 

57/27

62/30

Mix volume 

L 

120

170

Approx. weight 

kg 

4.6

4.6

 
The instructions contained in this manual must be strictly 
followed, it should be carefully read and kept close at 
hand to use when carrying out maintenance on the 
indicated parts. 
If the machine is used carefully and normal maintenance 
is carried out, it will work well for a long time. 
The functions and use of the tool you have bought shall 
be only those described in this manual. 

Any other use 

of the tool is strictly forbidden. 

ILLUSTRATIONS 

DESCRIPTION (See figures) 

 
A 

Safety push button switch (Fig.1) 

B 

On-/off switch (Fig.1) 

C  Drill chuck shaft gap (Fig.1) 
D  Mechanical speed shift lever (Fig.1) 
E 

Auxiliary grip (Fig.1) 

F 

Speed adjustment (Fig.1) 

G  Quick Fix Adapter (Fig.1 and 3) 
H  Mixing rod (Fig.1 and 2) 

EQUIPMENT 

-

  Quick Fix Adapter 

-

  2 mixing rods 

-

 Operating instructions 

-

 Safety instructions 

-

 Warranty 

SAFETY INSTRUCTIONS 



 See  “

Safety Instructions

” manual, supplied with this 

instruction manual. 



Warning!

 Follow the insurance company’s safety 

instructions regarding the responsibility of employees. 



 For your personal safety, always connect the machine 

to a mains supply protected by a differential and ther-
mal cut-out switch, in accordance with regulations on 
low-voltage wiring sitemaps. 



 Do not perforate the machine casing, as this would 

destroy the protective insulation (use adhesive labels). 



 Always unplug the machine before doing any work on it. 



Warning!

 Before each use, inspect the plug and 

lead. Should they need replacing, have this done by 
an official service centre. Only plug the machine in 
when it is switched off. 



 Always keep the lead out of the machine’s working area. 



 Only plug the machine in when it is switched off. 



 Do not allow the machine to get wet, nor should it be 

used in wet environments.  



 Hold the machine firmly by the handle and the auxiliary 

handle, otherwise the machine could work imprecisely 
or even dangerously. 



 The machine must not be used at a location where a 

danger of explosion exists. 



 Solvents or products containing solvents must not be 

mixed since there is a danger of igniting if the tempera-
ture exceeds 21ºC. 



 Officially approved extension cables must be used for 

outside operations. 



 The machine should only be start and stopped inside a 

container and this must be firmly fixed in place and 
unable to move. 



 Hands or other objects should not be inserted into the 

container when working with the machine in operation. 



 The machine should be inserted into or removed from 

the container at a low speed, and once inside, speed 
can be increased to maximum in order to prevent ma-
chine over-heating and it should be moved in all direc-
tions to guarantee thorough mixing. 



Keep work area clean and well lit. 

Cluttered and 

dark areas invite accidents. 



Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. 

Power tools create sparks which 

may ignite the dust or fumes.



Keep-children and bystanders away while oper-
ating a power tool.

 Distractions can cause you to 

lose control. 



Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and re-
frigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded. 



Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords increase 

the risk of electric shock. 



When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of 

cord suitable for outdoor use reduces the risk of 
electric shock. 



Stay alert, watch what you are doing and use 
common sense when operating a power tool. Do 
not use a power tool while you are tired or under 
the influence of drugs, alcohol or medication. 

A 

moment of inattention while operating power tools may 
result in serious personal injury.



Use safety equipment. Always wear eye protection. 

Safety equipment such as dust mask, non-skid safety 
shoes, hard hat, or hearing protection used for appro-
priate conditions will reduce personal injuries. 



Do not overreach. Keep proper footing and bal-
ance at all times. 

This enables better control of the 

power tool in unexpected situations.