Fein ASCT 18 M Select 71131664000 - Инструкция по эксплуатации - Страница 18

18

en

Follow the safety warnings in the operating instructions 
of the battery charger.

Hand/arm vibrations

The vibration emission level given in this information 
sheet has been measured in accordance with a stand-
ardised test given in EN 62841 and may be used to 
compare one tool with another. It may be used for a 
preliminary assessment of exposure.
The declared vibration emission level represents the 
main applications of the tool. However, if the tool is 
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may 
differ. This may significantly increase the exposure level 
over the total working period.
An estimation of the level of exposure to vibration 
should also take into account the times when the tool 
is switched off or when it is running but not actually 
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the oper-
ator from the effects of vibration such as: maintain the 
tool and the accessories, keep the hands warm, organi-
sation of work patterns.

Operating Instructions.

Adjust the rotation selector switch only when the 
machine is at a complete stop.
To avoid accidental starting, e. g., during transport, set 
the rotation selector switch to the centre position.
When overheated, the machine runs with short, low-
power impulses. Allow the machine to cool down at 
no-load speed.

ASCT18 / ASCT18M: 

The screwdriving applications are to 

be carried out with mounted depth stop.

ASCT18M / ASCT18UM: 

The collated cartridge may only 

be operated in “clockwise-rotation direction” position.

Setting the torque (ASCT18U / ASCT18UM)
(see page 7).

The factory setting is for the small to mid-size screw 
range.
The tightening torque also depends on the force with 
which the power tool is pressed against the screw.

Handling the battery.

Store, operate and charge the battery only using FEIN 
battery chargers within the battery operating-tempera-
ture range between 5 °C – 45 °C (41 °F – 113 °F). At 
the beginning of the charging procedure, the battery 
temperature must be within the battery operating-tem-
perature range.

The real percentage of the battery charge condition is 
only indicated when the power tool motor is stopped.
The electronics automatically switch off the motor 
prior to the battery being deep discharged.

Repair and customer service.

When working metal under extreme oper-
ating conditions, it is possible for conductive 
dust to settle in the interior of the power 

tool. Blow out the interior of the power tool via the 
ventilation slots frequently with dry and oil-free com-
pressed air. 
Products that have come into contact with asbestos 
may not be sent in for repair. Dispose of products con-
taminated with asbestos according to the applicable 
country-specific regulations for such disposal.
The current spares parts list for this power tool can be 
found on our website at www.fein.com.

If required, you can change the following parts your-
self:

 Application tools, depth stop, battery, belt clip, 

magazine

Warranty and liability.

The warranty for the product is valid in accordance 
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in 
accordance with the FEIN manufacturer’s warranty dec-
laration.
The delivery scope of your power tool may include 
only a part of the accessories described or shown in this 
Instruction Manual.

Declaration of conformity.

FEIN declares itself solely responsible for this product 
conforming with the relevant provisions given on the 
last page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH, 
D-73529 Schwäbisch Gmünd

Environmental protection, disposal.

Packaging, worn out power tools and accessories 
should be sorted for environmental-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insu-
late the terminals with tape as a protective measure 
against short-circuiting.

LED indica-
tor

Meaning

Activity

1 – 4 green 
LED

Percentage of 
charge condi-
tion

Operation

Continu-
ous red 
light

Battery is 
almost empty

Charge battery

Red flash-
ing light

Battery is not 
ready for 
operation

Bring the battery into 
the battery operating-
temperature range, 
then charge

LED indica-
tor

Meaning

Activity

OBJ_BUCH-0000000374-001.book  Page 18  Friday, January 24, 2020  9:46 AM