Шуруповерты Fein ASCT 18 M Select 71131664000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
en
en
Original Instructions.
Symbols, abbreviations and terms used.
Symbol, character
Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Oth-
erwise there may be danger of injury caused by unintentional starting of the power
tool.
Use eye protection during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against contin-
uous intense sunlight.
Observe the information in the adjacent text!
Gripping surface
Switching on
Switching off
Confirms the conformity of the power tool with the directives of the European Com-
munity.
This sign indicates a possible dangerous situation that could cause severe or fatal
injury.
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Low speed
High speed
Reduce torque
Increase torque
(**)
may contain numbers and letters
Character
Unit of measurement,
international
Unit of measure-
ment, national
Explanation
U
V
V
DC voltage
n
0
/min, min
-1
, rpm, r/min
rpm
No-load speed
n
1
/min, min
-1
, rpm, r/min
rpm
Speed, full load
M...
Nm
Nm
Torque (hard/soft screwdriving application)
WARNING
OBJ_BUCH-0000000374-001.book Page 16 Friday, January 24, 2020 9:46 AM
