Einhell TP-CD 18/60 Li BL - Инструкция по эксплуатации - Страница 16

GB

GB

- 16 -

3. Proper use

The cordless drill driver is designed for tightening 

and undoing screws in wood, as well as for drilling 

in wood, metal and plastic.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

4. Technical data

Voltage supply .......................................  18 V d.c.

Idling speed: .......................... 0-500 / 0-2000 rpm

Torque settings:  ........................................... 21+1

Forward and reverse rotation .......................... yes

Chuck clamping width ............................ 2-13 mm

Weight.........................................................1.1 kg

Max. screw diameter: .................................. 6 mm

Caution!

The equipment is supplied without batteries and 

without a charger and is allowed to be used only 

with the lithium-ion batteries of the Power-X-

Change series!

The lithium-ion batteries of the Power-X-Change 

series are allowed to be charged only with the 

Power-X charger.

The maximum screw diameter indicates the ma-

ximum diameter of the screw that can be screwed 

into wood. The screw diameter can vary depen-

ding on the type of wood.

Danger! 

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 62841.

L

pA

 sound pressure level  ..................... 74.3 dB(A)

K

pA

 uncertainty  ............................................. 5 dB

L

WA

 sound power level ......................... 85.3 dB(A)

K

WA

 uncertainty ............................................. 5 dB

Wear ear-muffs.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 62841.

Drilling in metal

Vibration emission value a

h

 ≤ 2.5 m/s

2

K uncertainty = 1.5 m/s

2

The stated vibration emission levels and stated 

noise emission values were measured in ac-

cordance with a set of standardized criteria and 

can be used to compare one power tool with 

another.

The stated vibration emission levels and stated 

noise emission values can also be used to make 

an initial assessment of exposure.

Warning:

The vibration and noise emission levels may vary 

from the level specified during actual use, depen

-

ding on the way in which the power tool is used, 

especially the type of workpiece it is used for.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution! 

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.  Lung damage if no suitable protective dust 

mask is used.

2.  Damage to hearing if no suitable ear protec-

tion is used.

3.  Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

Anl_TP-CD_18-60_Li_BL_SPK13.indb   16

Anl_TP-CD_18-60_Li_BL_SPK13.indb   16

03.08.2021   08:32:58

03.08.2021   08:32:58