Einhell TC-CD 18/35 Li - Инструкция по эксплуатации - Страница 22

GB

- 22 -

• 

 The cordless screwdriver is fitted with a 

quick-action chuck (8) with an automatic 

spindle stop.

• 

 Open the chuck (8). The chuck opening (a) 

must be large enough to hold the tool (drill bit 

or screwdriver bit).

• 

 Select the suitable tool. Push the tool as far 

as possible into the chuck opening (a).

• 

 Tighten the chuck (8) and then check that the 

tool is secure.

6.9 Screwdriving

It is advisable to use self-centering screws (e.g. 

Torx, cross recessed head) as these will enable 

you to work safely and reliably. Always make sure 

that the bit used is of the same size and shape as 

the screw. Set the torque to suit the screw size as 

speci

fi

 ed in the instructions.

7.  Cleaning, maintenance and 

ordering of spare parts

Danger!

Always pull out the battery pack before starting 

any cleaning work.

7.1 Cleaning

• 

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

• 

 We recommend that you clean the device  

immediately each time you have finished 

using it.

• 

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

7.2 Maintenance

There are no parts inside the equipment which  

require additional maintenance.

7.3 Ordering spare parts and accessories

Please provide the following information when 

ordering spare parts:

• 

Type of unit

• 

Article number of the unit

• 

ID number of the unit

• 

Spare part number of the required spare part

For our latest prices and information please go to 

www.isc-gmbh.info

Tip! For good results we 

recommend high-quality ac-

cessories from 

! 

www.kwb.eu 

welcome@kwb.eu

8.  Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

9. Storage

Store the equipment and accessories out of 

children’s reach in a dark and dry place at above 

freezing temperature. The ideal storage tempe-

rature is between 5 and 30 °C. Store the electric 

tool in its original packaging.

Anl_TC_CD_18_35_Li_SPK9.indb   22

Anl_TC_CD_18_35_Li_SPK9.indb   22

08.06.2018   09:03:24

08.06.2018   09:03:24