Шуруповерты DWT BM-280 T 5.1.7 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
11
English
tool damage. Bad condition of power tools is a frequent
cause of accidents.
•
Cutting tools should be kept clean and must be well-
sharpened. Cutting tools with sharp cutting edges,
which are properly fixed reduce the risk of seizure and
facilitate the control over power tools.
•
When using power tools and its accessories, follow
the instructions listed in this manual. During work with a
specific type of power tools, follow recommendations,
taking into account operational conditions and the type
of job performed.
Service of power tools
Your power tool should be serviced only by qualified
specialists, with the use of recommended spare parts.
This will guarantee labour safety, when your tool is
being applied.
•
Safety guidelines during
power tool operation
Avoid stopping an electric tool motor when loaded.
•
Maintain a stable position while working, hold the
electric tool with two hands.
• Never remove any chips or fragments with your
electric tool's motor running.
•
Before starting work, make sure where hidden
electric cables and water and gas pipes are situated.
Damaging the electric supply wiring or engineering
communications may cause a severe harm to the
operator's life and health.
• If the working schedule cannot exclude damaging
the main supply cables, they have to be de-ener
-
gized.
•
When working, follow the position of the power
supply cable. Avoid winding it around your legs or
arms.
•
Use only sharp drills without defects - it will make
working with the power tool easier.
• The modification of the drills design and the use of
removable orifices and accessories not envisaged for
this power tool is strictly forbidden.
• Do not apply excessive pressure when operating
the power tool - it can jam the drill and overload the
engine.
• Do not allow drills to jam in the material processed.
If this occurs, do not try to release them by means of
the power tool engine. This can put the power tool out
of order.
• Striking out drills jammed in the material processed
with a hammer or other objects is strictly forbidden -
metal fragments can hurt both the operator and the
people nearby.
• Avoid overheating your electric tool, when using it
for a long time.
• Never treat workpieces containing asbestos.
Asbestos is cosidered carcinogenic.
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings. Correct interpretation
of the symbols will allow correct and safe use of the
power tool.
Symbol
Meaning
Drill
Sections marked gray - soft
grip (with insulated surface)
Serial number sticker:
BM ... - model;
XX - date of manufacture;
XXXXXXX - serial number.
Read all safety regulations
and instructions.
Wear safety goggles and ear
protectors.
Wear a dust mask.
Disconnect the power tool
from the mains before instal-
lation or adjustment.
Risk of damage to hidden
wiring or household service
lines.
Movement direction.
Rotation direction.
Locked.
Unlocked.
Prohibited.
Double insulation / protec-
tion class.
Attention. Warning of possi-
ble user health damage.
