DENZEL EM-1-1220 27903 - Инструкция по эксплуатации - Страница 5

5

CONSTRUCTION ELECTRIC HAND MIXER 

EN

Electrical safety

a)  A cable plug of an electric tool must match a power outlet. Never modify an electrical cable plug. Do not use 

connecting adapter plugs, if there is a ground wire in the power cable of the electric tool.  Usage of the original 
cable plug and a corresponding power outlet reduces the risk of electric shock.

b)  While working with electric tool avoid physical contact with grounded objects such as pipelines, radiators, 

electric stoves and refrigerators. The risk of electric shock increases if your body is grounded.

c)  Do not use electric tool in the rain or in a humid environment. Water entering into the electric tool increases 

the risk of electric shock.

d)  Handle electrical cable with care. Never use the cable for carrying electric tool or pulling its plug out of the 

receptacle. Do not expose electrical cable to high temperatures and lubricants; keep it away from sharp edges 
and moving parts of the tool. Damaged or entangled cable increases the risk of electric shock.

e)  While working with electric tool outdoors use an extension cable intended for outdoor use. Using the cable 

suitable for working outdoors reduces the risk of electric shock.

f)  While working with electric tool in a humid environment use a power supply equipped with a safety protective 

shutdown device. The usage of this device reduces the risk of electric shock.

ATTENTION! 

It is recommended to use a residual current device (RCD) with a response current not exceeding 

30 mA.

Personal safety

a)  While working with electric tools be careful, watch what you do and use common sense. Do not use electric 

tool if you are tired, as well as being under the influence of alcohol or drugs lowering the reaction and other 
remedies. The slightest negligence may cause serious injury while working with electric tools.

b)  While working use personal protective equipment. Always wear safety glasses. Timely using of protective 

equipment such as: dust mask, boots with non-slip sole, safety hat or noise protection headphones, significantly 
reduces the risk of injury.

c)  Do not allow unintended start. Before plugging in electric tool and/or connecting it to the battery lift or move 

it, be sure the switch is in the “off” position. Do not carry electric tool with the trigger switch pressed and do not 
plug the electric tool into a power outlet if the switch is set to "on". This may lead to an accident.

d)  Before turning on the electric tool remove from it all adjusting keys or spanners. An adjusting key or spanner 

left fixed on the rotating part of the electric tool can cause severe injury.

e)  Work in a steady posture. Always keep your balance and a steady posture. This will allow you not to lose control 

when working with electric tool in an unexpected situation.

f)  Dress properly. Do not wear loose clothes or jewelry while working. Make sure your hair, clothing or gloves are 

at a constant distance from the rotating parts of the tool. Loose clothes, jewelry or long hair can get into the 
rotating parts of the tool. 

g)  If the electric tool is equipped with a dust collection and removal device, make sure this device is properly 

connected and used. The use of a dust removal device significantly reduces the risk of an accident due to a 
dusty working space.

Use of electric tools and technical care 

a)  Do not overload the electric tool. Use your tool for its intended purpose. The electric tool works safe and secure 

only if you keep to the parameters specified in its technical specifications. 

b)  Do not use the electric tool if its switch cannot be set to the “on” or “off” position. Electric tool with a broken 

switch is dangerous and must be repaired.

c)  Unplug the electric tool from the power outlet and/or remove battery before adjusting, replacement of 

accessories or when storing electric tool.  Such precautions reduce the risk of an accidentally turning on of the 
electric tool.

d)  Store unused electric tools out of the reach of children and do not let persons who are not familiar with electric 

tool or these instructions work with electric tools. Electric tools are dangerous in the hands of inexperienced users.