DENZEL CDL-IB-18-02 26113 - Инструкция по эксплуатации - Страница 11

Шуруповерты DENZEL CDL-IB-18-02 26113 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 28
Загружаем инструкцию
background image

11

CORDLESS DRILL/DRIVER

EN

MAINTENANCE

ATTENTION! 

Before starting maintenance work and setting up the tool disconnect the battery. To ensure 

quality and safe functioning keep your tool and vents clean at all times.

–  If you have noticed a decrease in the efficiency of the tool, extraneous noise or smell then you must contact the 

service center for timely diagnosis and repair.

–  Tooling maintenance. The use of the worn working tool reduces the effectiveness of the work and may result in 

motor or gearbox failure, so you need to sharpen periodically or replace worn removable tools, as soon as there 
is a need. 

–  Electric motor care. You must be especially careful with the electric motor, avoid getting liquids and foreign 

objects inside the case. Keep your ventilation holes clean, blow them regularly with compressed air or clean 
them with a brush. When noticeable sparks appear, contact an authorized service center for diagnostics and 
possibly replacement of carbon brushes.

Possible faults

Fault

Probable cause

Elimination method

The machine does not turn on, 
the charge indicator is not lit.

Low battery.

Charge the battery.

Defective switch.

Call the service center.

The machine does not turn on, 
the charge indicator is lit.

Engine malfunction.

Call the service center.

Increased noise in the gearbox.

Mode switch not fully turned on.

Switch to extreme position.

Worn or broken gearbox.

Call the service center.

Flashes in the vents of the case 
during operation, the smell of 
burning.

Engine malfunction.

Call the service center.

Tooling is not fixed or removed 
from the chuck.

Chuck clogging.

Remove the tooling and clean the 
chuck with compressed air.

Worn or broken chuck.

Call the service center.

The battery is not charging, 
indicator is on.

Battery fault.

Replace battery.

The battery is not charging, the 
lights are off.

Charger malfunction.

Call the service center or replace 
the charger.

RECYCLING

A tool, developed a designated service life, must be recycled according the rules established by environmental 
and other laws of the country, where the tool is operated.

TRANSPORTATION

During the transportation direct exposure of precipitation, direct sunlight, heat and shock is not allowed. 
Transportation should be carried out only in the original packaging at ambient temperature from -20 °С to +40 °С.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к DENZEL CDL-IB-18-02 26113?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"