GWB 12 V-10 Professional 0.601.390.908 - Инструкция по эксплуатации - Страница 16

Шуруповерты GWB 12 V-10 Professional 0.601.390.908 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 157
Загружаем инструкцию
background image

 English | 

15

Bosch Power Tools

2 610 016 854 | (20.9.11)

Temperature Dependent Overload Protection

When using as intended for, the power tool cannot be subject 

to overload. When the load is too high or the allowable battery 

temperature of 70 ° C is exceeded, the electronic control 

switches off the power tool until the temperature is in the op-

timum temperature range again.

Protection Against Deep Discharging

The lithium-ion battery is protected against deep discharging 

by the “Electronic Cell Protection (ECP)”. When the battery is 

empty, the machine is switched off by means of a protective 

circuit: The inserted tool no longer rotates.

Angle Selection of Drill Head (see figure D)

The drill head can be locked in 5 different angle positions. 

Push the release button 

5

 and swivel the tool head to the re-

quired position. Then, let go of the release button 

5

 again.

f

Before starting operation, check if the drill head is 

locked in the respective angle position. 

Danger of injury.

Working Advice

f

Apply the power tool to the screw only when it is 

switched off. 

Rotating tool inserts can slip off.

After longer periods of working at low speed, allow the ma-

chine to cool down by running it for approx. 3 minutes at max-

imum speed with no load.
For drilling in metal, use only perfectly sharpened HSS drill 

bits (HSS = high-speed steel). The appropriate quality is guar-

anteed by the Bosch accessories program.
Before screwing larger, longer screws into hard materials, it is 

advisable to predrill a pilot hole with the core diameter of the 

thread to approx. 

2

/

3

 of the screw length.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself (e. g. mainte-

nance, tool change, etc.) as well as during transport 

and storage, remove the battery from the power tool. 

There is danger of injury when unintentionally actuating 

the On/Off switch.

f

For safe and proper working, always keep the machine 

and ventilation slots clean.

When the battery is no longer operative, please refer to an au-

thorised after-sales service agent for Bosch power tools.
If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by 

an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of 

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of 

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: bsctools@icon.co.za

LED

Capacity

Continuous lighting 3 x green

 2/3

Continuous lighting 2 x green

 1/3

Continuous lighting 1 x green

< 1/3

Flashing light 1 x green

Reserve

OBJ_BUCH-1476-002.book  Page 15  Tuesday, September 20, 2011  12:10 PM

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к GWB 12 V-10 Professional 0.601.390.908?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"