Bosch GSR Mx2Drive - Инструкция по эксплуатации - Страница 14

1 609 92A 0CA | (24.6.13)

Bosch Power Tools

14

 | English 

of the power tool for operations different from those intended could result in a hazardous 
situation.

Battery tool use and care



Recharge only with the charger specified by the manufacturer. 

A charger that is suit-

able for one type of battery pack may create a risk of fire when used with another battery 
pack.



Use power tools only with specifically designated battery packs. 

Use of any other bat-

tery packs may create a risk of injury and fire.



When battery pack is not in use, keep it away from other metal objects, like paper 
clips, coins, keys, nails, screws or other small metal objects, that can make a con-
nection from one terminal to another. 

Shorting the battery terminals together may 

cause burns or a fire.



Under abusive conditions, liquid may be ejected from the battery; avoid contact. If 
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally 
seek medical help. 

Liquid ejected from the battery may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair person using only identical re-
placement parts. 

This will ensure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screwdriver



Hold power tool by insulated gripping surfaces, when performing an operation 
where the cutting accessory or fastener may contact hidden wiring. 

Cutting accesso-

ry and fasteners contacting a “live” wire may make exposed metal parts of the power tool 
“live” and could give the operator an electric shock.



Use auxiliary handle(s), if supplied with the tool. 

Loss of control can cause personal in-

jury.



Use appropriate detectors to determine if utility lines are hidden in the work area or 
call the local utility company for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line 
causes property damage.



Switch off the power tool immediately when the tool insert jams. Be prepared for 
high reaction torque that can cause kickback. 

The tool insert jams when:

— the power tool is subject to overload or
— it becomes wedged in the workpiece.



Hold the machine with a firm grip. 

High reaction torque can briefly occur while driving 

in and loosening screws.



Secure the workpiece. 

A workpiece clamped with clamping devices or in a vice is held 

more secure than by hand.



Always wait until the machine has come to a complete stop before placing it down. 

The tool insert can jam and lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

OBJ_BUCH-1208-003.book  Page 14  Monday, June 24, 2013  3:19 PM