Bosch GSR Mx2Drive - Инструкция по эксплуатации - Страница 13

English

 | 

13

Bosch Power Tools

1 609 92A 0CA | (24.6.13)

 English | 

13



If operating a power tool in a damp location is unavoidable, use a residual current de-
vice (RCD) protected supply. 

Use of an RCD reduces the risk of electric shock.

Personal safety



Stay alert, watch what you are doing and use common sense when operating a power 
tool. Do not use a power tool while you are tired or under the influence of drugs, al-
cohol or medication. 

A moment of inattention while operating power tools may result in 

serious personal injury.



Use personal protective equipment. Always wear eye protection. 

Protective equip-

ment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for 
appropriate conditions will reduce personal injuries.



Prevent unintentional starting. Ensure the switch is in the off-position before con-
necting to power source and/or battery pack, picking up or carrying the tool. 

Carry-

ing power tools with your finger on the switch or energising power tools that have the 
switch on invites accidents.



Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a 

key left attached to a rotating part of the power tool may result in personal injury.



Do not overreach. Keep proper footing and balance at all times. 

This enables better 

control of the power tool in unexpected situations.



Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and 
gloves away from moving parts. 

Loose clothes, jewellery or long hair can be caught in 

moving parts.



If devices are provided for the connection of dust extraction and collection facili-
ties, ensure these are connected and properly used. 

Use of dust collection can reduce 

dust-related hazards.

Power tool use and care



Do not force the power tool. Use the correct power tool for your application. 

The cor-

rect power tool will do the job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it on and off. 

Any power tool that 

cannot be controlled with the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the battery pack from the power 
tool before making any adjustments, changing accessories, or storing power tools. 

Such preventive safety measures reduce the risk of starting the power tool accidentally.



Store idle power tools out of the reach of children and do not allow persons unfamil-
iar with the power tool or these instructions to operate the power tool. 

Power tools 

are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the power tool’s operation. If dam-
aged, have the power tool repaired before use. 

Many accidents are caused by poorly 

maintained power tools.



Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier to control.



Use the power tool, accessories and tool bits etc. in accordance with these instruc-
tions, taking into account the working conditions and the work to be performed. 

Use 

OBJ_BUCH-1208-003.book  Page 13  Monday, June 24, 2013  3:19 PM